TexasRebel
Gearshifter
- Joined
- Mar 19, 2016
- Threads
- 27
- Messages
- 2,500
- Reaction score
- 836
- Location
- between the mustard and the mayo
- Vehicle(s)
- 2016 YZ GTPP - PP2
- Thread starter
- #1
I thought a 3 y.o. battery was the culprit, but I changed that out and it didn’t help.
Vehicle doesn’t seem to be responding to the key.
Lock & unlock don’t work. If I press the trunk open button repeatedly it will flash the hazards once. Door handles don’t lock or unlock doors. Interior buttons don’t do anything either.
Trunk lid buttons don’t respond. Both under the bumper and on the dashboard.
Start button doesn’t light up when I press the clutch. When I press the start button it asks for the clutch to be pressed even if it is.
Wrench light comes on and says, ”see manual”.
Power steering assist fault comes up.
Engine doesn’t turn over.
Radio powers up and appears to tune to a station, but does not produce sound.
Driver window does the normal dip when the door opens and closes. Passenger side window is stuck in the dip-down position.
I’m looking for any suggestions before I trailer this thing to the dealership. I‘ll try to pull codes if I can get my scanner working.
EDIT FOR SOLUTION:
The BCM came unplugged… somehow.
Vehicle doesn’t seem to be responding to the key.
Lock & unlock don’t work. If I press the trunk open button repeatedly it will flash the hazards once. Door handles don’t lock or unlock doors. Interior buttons don’t do anything either.
Trunk lid buttons don’t respond. Both under the bumper and on the dashboard.
Start button doesn’t light up when I press the clutch. When I press the start button it asks for the clutch to be pressed even if it is.
Wrench light comes on and says, ”see manual”.
Power steering assist fault comes up.
Engine doesn’t turn over.
Radio powers up and appears to tune to a station, but does not produce sound.
Driver window does the normal dip when the door opens and closes. Passenger side window is stuck in the dip-down position.
I’m looking for any suggestions before I trailer this thing to the dealership. I‘ll try to pull codes if I can get my scanner working.
EDIT FOR SOLUTION:
The BCM came unplugged… somehow.
Sponsored
Last edited: