What did you do to your S550 Mustang today?!

[WildHorse]

UPR PRO SERIES VERTICAL LINKS INSTALLED.

Sponsored

 

[mrgooden]

Are you talking about the caps on the strut tower?

If you mean me, no. I am talking about the Ford Performance fuel rail covers.

Richard

 

[Nodster]

UPR PRO SERIES VERTICAL LINKS INSTALLED.

Ohh nice! Is it as easy as it looks (I was reading the Steeda instructions the other night). I've just purchased a new Wera 60-300Nm 1/2" torque wrench to help me with this job (as well for using on the wheel studs). The vertical links and subframe alignment kit are on my list.

 

[mrgooden]

I would like the black caps also , all I've found was silver

I bought those on CJ pony a couple years or so ago. I still need to have the base of strut caps shaved about 1/2 inch so they sit flush with the strut tower.


https://www.cjponyparts.com/upr-str...-v6-2015-2017-ecoboost-gt-2015-2022/p/HW4498/

Richard

 

[WildHorse]

Ohh nice! Is it as easy as it looks (I was reading the Steeda instructions the other night). I've just purchased a new Wera 60-300Nm 1/2" torque wrench to help me with this job (as well for using on the wheel studs). The vertical links and subframe alignment kit are on my list.

Yeah it was a pretty easy install. I already have the STEEDA Subframe Alignment and Bushing Support kit installed as well.

 

[mrgooden]

it looks like your engine is wearing a thong

I too liked the thong and went to home depot and got some blades for my dremmel. Works will with the other covers I put on.

 

[olerodder]

I too liked the thong and went to home depot and got some blades for my dremmel. Works will with the other covers I put on.

I like too! It looks better than having nothing covering the runners. I also got the Bullitt covers for the fuel rails, although I got them used, I'm not sure they are worth $100.

I too liked the thong and went to home depot and got some blades for my dremmel. Works will with the other covers I put on.

Looks great along with the Bullitt fuel rail covers.

 

[Cordero1]

Finished for the week. Diode dynamic smoked quater lights, Scott Drake super cheap quality deffuser, & 20×10/11 Rhona wheels. Idk if they will hit the struts yet, havent test drove it. Will give er' a wash tomorrow & see how it looks.

 

[RTR077]

Drove the Tail of the dragon for the first time. Wow, what a rush. 11 miles of smiles baby.

 

[ice445]

Cruised state street with some friends to test out my new wheels and tires. 80F today, what a fun time (other than the traffic lol).

 

[m3incorp]

I did three things today. Two were good and one not so good. 1. I went to Ponies in the Smokies and had a great time. 2. I drove Tail of the Dragon and that was also great. 3. Curbed both wheels on passenger side attempting to avoid a pedestrian that stepped into the street in Gatlinburg. I didn't hit him, so that was good.

Oh, I also met the Velgen Wheels rep that posts on this forum; very nice guy.

 

[Mr. Met]

Installed the Ford Performance center gauge.

I noticed there is a small speck/dust on the inside of the glass. Anyone have an idea on how I can get this off?

 

[GT Pony]

3. Curbed both wheels on passenger side attempting to avoid a pedestrian that stepped into the street in Gatlinburg. I didn't hit him, so that was good.

Oh, I also met the Velgen Wheels rep that posts on this forum; very nice guy.

Curbed wheels and met the Velgen Wheels rep on the same day ... coincidence or not?

 

[m3incorp]

Dang, didn't think of that lol and the wheels are Velgen.

Curbed wheels and met the Velgen Wheels rep on the same day ... coincidence or not?

 

[Jroy333]

Installed the Ford Performance center gauge.

I noticed there is a small speck/dust on the inside of the glass. Anyone have an idea on how I can get this off?

Take the dashboard off and unplug the guages. four screws to take the gauge pack off and I think 2-4 screws to take the face and lens off to clean

Sponsored