What did you do to your GT350 today?

[Jmeo]

Available now
https://reverselogic.us/lug-guides/Extended-Length-Female-Threaded-Lug-Guide-Tools-p62332249

They don’t have MINT video though.

Sponsored

 

[pilotgore]

They don’t have MINT video though.

Sex sells…..

 

[Jmeo]

Sex sells…..

It’s a brilliant humor approach. To me anyway.

 

[galaxy]

hahahah...that video was great! Great approach!

 

[HoosierDaddy]

Available now
https://reverselogic.us/lug-guides/Extended-Length-Female-Threaded-Lug-Guide-Tools-p62332249

Mine arrive tomorrow.

 

[Inthehighdesert]

What size hole saw did you use? Also, was the splitter aftermarket? Thanks

I swapped out the stock 350 splitter for the R splitter to try and get a little more front end downforce. This splitter was an ebay special, which fit pretty well but needed slight modification to work. I’m very happy with the look of the splitter!

I also cut larger holes in the strut tower allowing for more negative camber.

 

[NoXiDe]

The one he and I used is designed by Steeda. It's designed to fit the OEM strut nut as a way to guide the cut. Cutting oil is recommended to extend the life of the tool. Once you're done, you'll want to clean the edges and add touchup paint and clear if you got any. Clear isn't necessary tho.

https://www.steeda.com/steeda-555-8920-s550-strut-tower-cutting-tool

 

[pilotgore]

What size hole saw did you use? Also, was the splitter aftermarket? Thanks

It was aftermarket. I used the one available on ebay for $580 plus shipping. I had to trim a few tabs to get it to fit properly, but all in all I’d consider it a great value.

 

[Inthehighdesert]

Thanks. The Steeda “jig” is pretty cool. For me it’s just as easy toI pop out a jig with some leftover plywood in a few minutes. That 2 3/4” number is what I was after.

The one he and I used is designed by Steeda. It's designed to fit the OEM strut nut as a way to guide the cut. Cutting oil is recommended to extend the life of the tool. Once you're done, you'll want to clean the edges and add touchup paint and clear if you got any. Clear isn't necessary tho.

https://www.steeda.com/steeda-555-8920-s550-strut-tower-cutting-tool

 

[COBRA-KI]

New shoes for the GT350.

 

[G8rbcn]

Technically yesterday - Track Day at Road Atlanta.

 

[CarbonZ]

Started installing stripes today. Got this far...took me a long time lol. Many hours. Maybe finish up tomorrow. Digging it so far though

Bigworm kit matte with gloss white stripes to change it up.

Crappy pic and where the hell the did the day go.

Edit:. More progress. Gotta trim a little once the pinstripe sets and a little heat. Front and roof is all done pretty much though.

Big pieces are quick and easy. It's the little ones on the bumpers that take forever for me to get everything spaces right

Plan is to finish it up today. Then let her sit in the sun tomorrow. Wash Monday then take for a cruise.


Last edit: had to spin the car around to do the lower rear plate area. Snapped a pic before she went back into the garage. I'm really liking it though. But man does lining and measuring everything up for each piece take some time

 

[Lorne34]

Went for a cruise and listened to some music. I have a specific GT350 Playlist on Spotify for when I ride. Yes, the exhaust note is fantastic, but sometimes music is great too.
Here is one of my favorite "drive songs"..... going on a trip down south in July and will be creating a "Road Trip" playlist for that.

 

[Burger16b]

Barton short throw flat shift kit. I hated the pull-up collar.

 

[SL8888]

Saturday, May 8th. First track day at Mid-Ohio with my GT-350. Several other GT-350’s were at the track also

Sponsored