Taller CFTP Wing standoff options ?

[EF300]

Exactly. Don’t advertise them from a vendor page. Have someone run the parts down to a machine shop, figure out a prototype, and do a group buy.

Agree , totally down for this

Sponsored

 

[Tomster]

Exactly. Don’t advertise them from a vendor page. Have someone run the parts down to a machine shop, figure out a prototype, and do a group buy.

Yes, like 20 or so and don't market them for future sale.. multimatic would not care unless you were to start cranking them out without limits.

I would take that chance.

In fact, whoever winds up with the mounts, ler me have them for a little while to have them replicated. I used to shoot machine guns for a large manufacturer that had a large production capacity.

One step at a time. First someone willing has to get their hands on the mounts

 

[Tonymustang302]

Is this really happening…..this is like a true unicorn. Id be up for a set

 

[JN66]

I’m in to buy and i will also help pay for the development if required.

 

[L8APEX]

I would say screw the patent. As long as you are not mass producing them, you won't have any issue. A few in a lot and nobody is going to care.

Yikes. There is never a justifiable reason to engage in patent infringement.

 

[Kaneisin33]

count me in!
I’ve been wanting these mounts ever since I saw them on the Mustang GT4.

 

[AngelDeath]

I have an interest in this too.

 

[EF300]

Yikes. There is never a justifiable reason to engage in patent infringement.

I agree probably best just to make a few minor adjustments such as slight thickness increase or minimal design change to keep it just different enough from the multimatic set up.

 

[Tomster]

Yikes. There is never a justifiable reason to engage in patent infringement.

Then there you go. Its dead

 

[JN66]

Then there you go. Its dead

As a Canadian, whose Country is on its way to communism, I suspect patent laws will no longer be applicable here.

I can likely lead the process with no repercussions

 

[Evolvd]

Yikes. There is never a justifiable reason to engage in patent infringement.

How many aftermarket car parts are nearly identical to the OEM ones?

 

[JeremyPro5.0]

Tom
As I offered before. Get me the mounts. I will reverse engineer them and offer them with improvements. That is how it’s done.

Copying and selling a patented item is a no go for any company and I feel it should be.

Offering an improved version is what started the aftermarket.

 

[Warpath]

Tom
As I offered before. Get me the mounts. I will reverse engineer them and offer them with improvements. That is how it’s done.

Copying and selling a patented item is a no go for any company and I feel it should be.

Offering an improved version is what started the aftermarket.

Can we do just longer oem ones????

 

[EF300]

Then there you go. Its dead

Nothing is dead we just have to respect the copyright it is not a big deal. Minor imperceptible tweet will likely suffice.

 

[EF300]

Can we do just longer oem ones????

Yes we can definitely do that as well. Somebody just needs to get a mount to one of the members willing to scan it and cut a prototype.

Sponsored