What did you do to your S550 Mustang today?!

[WD Pro]

I’ll be doing those mods to my car shortly, belly pan and control arms with the happy little fins…

Some guy on here makes bigger aluminium fins if you plan on living up to your forum name

I think its @GTP ?

WD

Sponsored

 

[GTP]

Some guy on here makes bigger aluminium fins if you plan on living up to your forum name

I think its @GTP ?

WD

Yeah that's me.
https://www.mustang6g.com/forums/threads/brake-air-deflector-vanes-for-pp1-2-cars.164692/

395F Max rotor temp Monday at Gingerman.

 

[Nodster]

Its only because I did a bit of digging when I spotted mine were closed lol

You can see the duct just entering the wheel well (very bottom left) and the deflector on the suspension arm :

The duct on the outer edge still exists :

But the entrance on the front fascia is blocked

Euro / PP1 spec 2020.

WD

Will they be on my car as well WD?

PS. I really need to scrub my arch liners. How is yours so clean lol.

 

[WD Pro]

Will they be on my car as well WD?

PS. I really need to scrub my arch liners. How is yours so clean lol.

Should be I believe all facelift U.K. GT’s should have them - I’m not sure about pre facelift GT’s and any EB’s.

It’s only clean because I have two other cars to use so I can be selective as to when I use it. Wet weather and salt etc see me using another option

WD

 

[BlackstangGT]

Yeah that's me.
https://www.mustang6g.com/forums/threads/brake-air-deflector-vanes-for-pp1-2-cars.164692/

395F Max rotor temp Monday at Gingerman.

What about non-PP1/2 cars?
Will they work on them too?

 

[GTP]

What about non-PP1/2 cars?
Will they work on them too?

A couple options. You can replace the arms, or you can use a couple U-bolts per side. Even though my car is PP, I replaced the arms with Steeda's that had the spherical bearing already pressed in.

PM me and we can discuss in more detail.

 

[Roy 3Fidy]

Purchase a GT350 Alcantara Steering wheel and a Lloyds Trunk Mat for my car

 

[ShadesOfBloo]

(Does it count as “today” if it was 16 hours ago?)
I went to PetSmart and brought home a cat castle in my “Meowstang”

The trunk opening is an unhelpful shape, but there was room in the back seat.
I just had to roll the window down to get it in.

Once it was all the way in I could roll the window back up.

The trunk wasn’t empty, though. I bought some kitten food and a shallow litter box

After I took all that stuff home, my next trip was to the Norfolk Animal Care Center (city-run shelter) to pick up a baby kitty.

She’s very energetic for someone who just had surgery. She’s enjoying the cat castle, and batting the hanging butterfly toy.

 

[MattMPA]

(Does it count as “today” if it was 16 hours ago?)
I went to PetSmart and brought home a cat castle in my “Meowstang”

The trunk opening is an unhelpful shape, but there was room in the back seat.
I just had to roll the window down to get it in.

Once it was all the way in I could roll the window back up.

The trunk wasn’t empty, though. I bought some kitten food and a shallow litter box

After I took all that stuff home, my next trip was to the Norfolk Animal Care Center (city-run shelter) to pick up a baby kitty.

She’s very energetic for someone who just had surgery. She’s enjoying the cat castle, and batting the hanging butterfly toy.

Good for both of you!

 

[Cobra Jet]

21 GT Premium brake ducts.

Is that factory? My ‘21 GT premium P1 is blocked.

Yes, my picture is a stock 2021 GT Premium 401A A10 non-P1 car brake vent.

Here's an older thread discussing the front fascia "vents" with pics
https://www.mustang6g.com/forums/threads/2018-front-bumper-corner-honeycombs-removal.120682/page-3

Starting in 2015, the PP GT and PP EB came standard with the open fascia vents found in the parking/fog assembly area. These vents also had a specific matching inner fender liner with the opening for the duct.

This carried over into 2018, but I'm still not sure why some 2018+ PP's are not vented... My 2018 IS vented like my prior 2016. Is it an assembly line error? Who knows...

 

[KingKona]

(Does it count as “today” if it was 16 hours ago?)
I went to PetSmart and brought home a cat castle in my “Meowstang”

The trunk opening is an unhelpful shape, but there was room in the back seat.
I just had to roll the window down to get it in.

Once it was all the way in I could roll the window back up.

The trunk wasn’t empty, though. I bought some kitten food and a shallow litter box

After I took all that stuff home, my next trip was to the Norfolk Animal Care Center (city-run shelter) to pick up a baby kitty.

She’s very energetic for someone who just had surgery. She’s enjoying the cat castle, and batting the hanging butterfly toy.

Hey dude, in all seriousness....make sure the cat can drink water with that cone on. Cones are stupid, there's other solutions. Cats can go days without food, but not water. Gotta make sure she can easily drink water.

 

[GTP]

After 20 years I decided to finally have my street repaved.
Unbelievably expensive mod but 80,000 friends helped with the cost.

 

[WD Pro]

Time to try out the line lock function right down the middle ...

WD

 

[GTP]

After 20 years I decided to finally have my street repaved.
...

This guy only had two wheels. I asked him how he liked it's stagger.

 

[GTP]

Here's an older thread discussing the front fascia "vents" with pics
https://www.mustang6g.com/forums/threads/2018-front-bumper-corner-honeycombs-removal.120682/page-3

Starting in 2015, the PP GT and PP EB came standard with the open fascia vents found in the parking/fog assembly area. These vents also had a specific matching inner fender liner with the opening for the duct.

The EB vents aren't expensive. But before everyone rushes to order them, make sure you can remove the old ones. I couldn't. And it didn't track the AM video due to heat welds in the way.

Sponsored