It won’t mess up anything as long as you select the correct downloads. If your u it is EU you need to select EU maps(F8) and NOT NA. For further assistance I suggest going over to the Cyanlabs forum.Q
Have a 2015 EU car which originally came with sync 2.
Swapped it to sync 3 in 2017. Now I want to upgrade to 3.4 but my vin is of course not accepted for upgrade
I made a USB stick with the latest version of cyanlabs.net V20136.
My sync3 display was purchased in Dubai
A nice mix but a bit afraid to launch the stick.
Anything I can check to be sure it will not mess up everything ?
Thx
Brightness adjustment was removed a few builds ago. Now you can only adjust when headlights are on. Night modeSo....updated and screen brightness setting is greyed out. Ive tried all modes still cant adjust screen brightness. Anyone else?
interesting so why leave the slider there if its disabled? oh well.Brightness adjustment was removed a few builds ago. Now you can only adjust when headlights are on. Night mode
Because the display can still be dimmed... in night mode.interesting so why leave the slider there if its disabled? oh well.
This is what I am saying in my original post. I HAVE put in into everymode and I CAN NOT dim it in any mode Including night. the dash dimmer dims the dash display but not the radio display regardless of what mode im in. Day, Night, Auto the slider is grayed out in all modes. I have tried with and with out headlights... still greyed out.Because the display can still be dimmed... in night mode.
I'm confused. Isn't the map updated with the Sync update? Or is the map update done separately?
Then there might be an issue in the config. Check this setting with Forscan 7D0-01-01 x?xx-xxxx-xxxx and report backThis is what I am saying in my original post. I HAVE put in into everymode and I CAN NOT dim it in any mode Including night. the dash dimmer dims the dash display but not the radio display regardless of what mode im in. Day, Night, Auto the slider is grayed out in all modes. I have tried with and with out headlights... still greyed out.
will do thanks. I gotta set all that up again havnt used forscan in about 6 monthsThen there might be an issue in the config. Check this setting with Forscan 7D0-01-01 x?xx-xxxx-xxxx and report back
Did you shut the car off completely and wait a few minutes? Then re-start?Weird, mine installed successfully, even created the xml file on my usb drive, even said so on my sync3 screen, but its still using sync 3.3.
just right away, said install complete. i guess ill be surprised when i start it up againDid you shut the car off completely and wait a few minutes? Then re-start?
Got a sync 3 without NAV, Waze is much better ! and selected EU, so that should be fine.It won’t mess up anything as long as you select the correct downloads. If your u it is EU you need to select EU maps(F8) and NOT NA. For further assistance I suggest going over to the Cyanlabs forum.