Send a log in to see what things look like only they would be able to tell.I don't want to compete with you on that front. So you think with datalog there could still be some more to get out?
would also needSend a log in to see what things look like only they would be able to tell.
Below are the parameters we need you to manually select before you begin logging.
ect_degf
iat_in_degf
load
maf_flow_rate_lb_per_min
maf_frequency
measured_afr_bank_1
measured_afr_bank_2
rpm
spark_advance
spark_advance_v2
torque_source
vehicle_speed_mph
short_term_trim_1
short_term_trim_2
knock_sensor
throttle_angle_actual
The process to get the log is this:
Once the car is started and up to operating temp, start the log. Let the car idle for at least 2 minutes. Drive the car like normal for a couple minutes. Now, do a couple 3rd gear WOT pulls from 2500-7200 RPM. Once you have done the WOT pulls you are done. Save the Log as a .CSV file and reply to this email with the log as an attachment.
Are you manual or automatic? Sounds like an automatic from the video.Talk about consistant times. Why would my MPH be all over if everything else was so similar? Look at 1 vs 4.