Differential inserts.

[WildHorse]

I don't want the differential moving at all-ish.
Short of just sticking a solid mount to replace
the rubber ones, what are your recommendations ?

Thanks !

Sponsored

 

[K4fxd]

Aluminum inserts.

Here is one
https://www.cjponyparts.com/steeda-...MItpa599CTiAMVdEH_AR00IwU6EAQYAiABEgL-3_D_BwE

 

[NGOT8R]

Steeda black bushings with through bolt kit.

 

[WildHorse]

Aluminum inserts.

Would rather avoid those.

Steeda black bushings with through bolt kit.

That's what your running ? What's the kit # ?

 

[NGOT8R]

That's what your running ? What's the kit # ?

Yes. Here’s the link to the kit that I bought (only used the black inserts though).

https://www.steeda.com/steeda-s550-...MInfijv4-ViAMVUZ1aBR0IxCSPEAQYASABEgLQnvD_BwE

I upgraded the bolt kit with these.

https://www.steeda.com/steeda-555-4...MI46KvkJCViAMVpYBaBR0z_CoJEAQYASABEgJ8GfD_BwE

I also have this kit as well.

https://www.steeda.com/steeda-555-4050-s550-differential-support-brackets

 

[WD Pro]

Yes. Here’s the link to the kit that I bought (only used the black inserts though).

https://www.steeda.com/steeda-s550-mustang-adjustable-differential-bushing-insert-system-urethane-2015-ecoboost-555-4443.html?setCurrencyId=1&sku=555 4443&gad_source=1&gbraid=0AAAAADtDFHPScDhfblT-iaV69izvmUxCt&gclid=EAIaIQobChMInfijv4-ViAMVUZ1aBR0IxCSPEAQYASABEgLQnvD_BwE

I bought the same kit (off @shogun32), but used the red inserts.

I went with 12.9 bolts (will go M16 further down the line).

That left me with a lot of spare bits, so I got new spacers and washers, then sold a full black kit to recoup some of my costs

WD

 

[NGOT8R]

I bought the same kit (off @shogun32), but used the red inserts.

I went with 12.9 bolts (will go M16 further down the line).

That left me with a lot of spare bits, so I got new spacers and washers, then sold a full black kit to recoup some of my costs

WD

Smart thinking there WD. I should probably do the same thing (once I unpack everything again). Getting ready for an upcoming move further north in Florida, so I have no idea where anything is now, lol.

 

[GTP]

Steeda blacks, stock bolts, but with gap sleeves that I make.

Stock bushings for the subframe to body.

 

[shogun32]

Steeda blacks, stock bolts, but with gap sleeves that I make.

yeah, using the pucks but not also taking care of the shank-to-hole diameter mismatch is IMO only doing half the job.

Lethal has a VERY nice writeup and pics.
https://www.lethalperformance.com/info/extreme-bolt-upgrade

other combo kits include:
https://bmrsuspension.com/?page=products&productid=1764

Steeda's inexplicably omits the sleeves.

If you've done a hardware or puck upgrade without the complete fix, you need to give Phillip (GTP) a jangle, so he can warm up the ol' lathe.

 

[agmattocks]

Aluminum inserts.

Here is one
https://www.cjponyparts.com/steeda-...MItpa599CTiAMVdEH_AR00IwU6EAQYAiABEgL-3_D_BwE

I've used these on all of my S550's...

 

[WItoTX]

Yes. Here’s the link to the kit that I bought (only used the black inserts though).

https://www.steeda.com/steeda-s550-mustang-adjustable-differential-bushing-insert-system-urethane-2015-ecoboost-555-4443.html?setCurrencyId=1&sku=555 4443&gad_source=1&gbraid=0AAAAADtDFHPScDhfblT-iaV69izvmUxCt&gclid=EAIaIQobChMInfijv4-ViAMVUZ1aBR0IxCSPEAQYASABEgLQnvD_BwE

I upgraded the bolt kit with these.

https://www.steeda.com/steeda-555-4051-s550-differential-bolt-upgrade-kit?setCurrencyId=1&sku=555 4051&gad_source=1&gbraid=0AAAAADtDFHPScDhfblT-iaV69izvmUxCt&gclid=EAIaIQobChMI46KvkJCViAMVpYBaBR0z_CoJEAQYASABEgJ8GfD_BwE

I also have this kit as well.

https://www.steeda.com/steeda-555-4050-s550-differential-support-brackets

Those through bolts seem like a massive pain on the front bolts LOL. At least in my experience.

The Steeda hardware included is way better than the factory crap.

 

[NGOT8R]

Those through bolts seem like a massive pain on the front bolts LOL. At least in my experience.

The Steeda hardware included is way better than the factory crap.

Yeah, it was a bit of a challenge to do working alone. I installed my entire differential bushing kit, along with the differential bracket kit at the same time. I did drop the cradle, in order to work comfortably.

 

[shogun32]

what's the circle'd bit?

 

[NGOT8R]

what's the circle'd bit?

That’s the Steeda Differential Bracket kit.

https://www.steeda.com/steeda-555-4050-s550-differential-support-brackets

 

[WildHorse]

What's the difference between the RED & BLACK bushings ?

@NGOT8R how much do you want ?

Sponsored