D1x stage 2 installed!

[80FoxCoupe]

Did you do the crank sprocket also?

Sponsored

 

[TGGT]

Did you do the crank sprocket also?

no. after talking with my tuner and him talking to another tuner, who’s big in the coyote scene, it was confirmed that ford Motorsport crank gear is standard equipment on 18&up

 

[80FoxCoupe]

Ah man, that's a shame. You were right there.

 

[TGGT]

Ah man, that's a shame. You were right there.

I’m sure a billet one is stronger than the factory forged piece. That being said I won’t be stressing out on the crank gear every time I make a pull the way I would have with the factory opg’s.

 

[Evolution IX]

no. after talking with my tuner and him talking to another tuner, who’s big in the coyote scene, it was confirmed that ford Motorsport crank gear is standard equipment on 18&up

You were literally right there and it is such cheap insurance.

 

[TGGT]

You were literally right there and it is such cheap insurance.

What’s done is done. The factory gear is plenty strong.

 

[TGGT]

Got the fuel system finished up today and now I’m just waiting for a tune. I ended up building my own harness which was a little bit of a hassle, but it’s done now. Probably the hardest part was modifying the stock rail. Drilling into tubing is challenging enough, but then I decided to silver solder it which I had never done before, but managed to figure it out. It doesn’t look pretty, but there’s no leaks.

 

[Whitedevil95]

Moving along nicely!!

 

[TGGT]

Moving along nicely!!

Yeah kind of. I think my oil pan gasket may be leaking and I’ve got a cam actuator code that I’m a little concerned about.

 

[TGGT]

Think I solved my cam code issue. Found the exhaust cam Solenoid unplugged on bank 1. Just waiting on a base file so I can start it

 

[TGGT]

Got a base tune in the car, and I’m driving it. My tuner says it’s good and I can get on it a little bit. We are supposed to strap to the Dyno on Wednesday. I did a little 4th gear hit and my god! It got pretty sideways. Awesome!

 

[80FoxCoupe]

Who is tuning?

 

[TGGT]

Who is tuning?

Brc raceworks. Formerly Cunningham Motorsports

 

[80FoxCoupe]

Brc raceworks. Formerly Cunningham Motorsports

Heck yeah. Got a specific goal at the drag strip in mind?

 

[TGGT]

Heck yeah. Got a specific goal at the drag strip in mind?

I haven’t been to the strip in a long time. For now I just want to have it running good on the street, but eventually I would like to be some where in the mid to low 9’s

Sponsored