Stage 2 d1x Dyno numbers!

[Confuzed]

I would not go to track without a fuel system! Fuel will pop an engine fast if lean. I had to go with a Fore as well when I switched to the D1X.

whatsup62 your car should have 8'' crank pulley correct (youres is 2015) his should be 7.5 crank pulley(18 on up) probably 1-2 psi difference

Sponsored

 

[whatsup62]

whatsup62 your car should have 8'' crank pulley correct (youres is 2015) his should be 7.5 crank pulley(18 on up) probably 1-2 psi difference

Yes...that is correct

 

[TGGT]

Yes...that is correct

whatsup62 your car should have 8'' crank pulley correct (youres is 2015) his should be 7.5 crank pulley(18 on up) probably 1-2 psi difference

Im also a point higher in compression though. It would be questionable at the track right now as far as fueling, but for cruising around town and melting the tires off, it’s fine.

 

[Confuzed]

Mainly asking because I see 13-14 psi and use Ho pulley setup. Mine and whatsup62 have similar impeller rpm. I run 6.5 crank and 3.8 blower pulley.

Sponsored