Custom shift dial

[marklboris]

good info, i may do it toms way and put the adhesive on the dial first. Does it matter what flavor popsicle stick u use?

Kevin's (5 SPURS) instructions on his website suggest to place the adhesive on the knob/dial first then put the cover on. I've installed several of these on S550 Mustangs and Mach-E's and find it easier to do it this way rather than trying to place the adhesive inside the cover. However whatever works best for you because the end result is the same.

Sponsored

 

[Inthehighdesert]

Thanks! For whatever reason there site wasn’t showing the installed pics yesterday when I was trying to look. That’s a pretty big improvement.

Like the way, it muted the control knobs & switch toggles, a great addition & clean.

Plastic chrome just does not cut it, for me. Santa comes to Woodstock tomorrow .

 

[Rapid Red]

good info, i may do it toms way and put the adhesive on the dial first. Does it matter what flavor popsicle stick u use?

Unused, I have them for spreading & mixing 2 part epoxy, and installing dial covers LOL

 

[Tomster]

So you making it pretty, no more track time???? Just car shows??

Hmm.... I didn't see you at Daytona this year.... you were missed, always great to have a jokester like you around. You are the life of the party.

 

[WD Pro]

Hmm.... I didn't see you at Daytona this year.... you were missed, always great to have a jokester like you around. You are the life of the party.

If he brings his avatar with him, I'm pissed he wasn't there too ...

WD

 

[Tomster]

If he brings his avatar with him, I'm pissed he wasn't there too ...

WD

That's Jim with his helmet on doing a selfie. He's doing the horomone regimen for sex change purposes

 

[16Kobra]

Hmm.... I didn't see you at Daytona this year.... you were missed, always great to have a jokester like you around. You are the life of the party.

Thanks, coming from you I will take that as a compliment!!!!

 

[16Kobra]

That's Jim with his helmet on doing a selfie. He's doing the horomone regimen for sex change purposes

Now you are crossing the line.....

LOL

 

[Evolvd]

Any chance of making these in the other colors you have for the shift ring? Personally I think the black makes the panel look to bland.

 

[marklboris]

Any chance of making these in the other colors you have for the shift ring? Personally I think the black makes the panel look to bland.

I believe Kevin can to this since he makes other covers in various colors. I will check and get back to you.

 

[Tomster]

I believe Kevin can to this since he makes other covers in various colors. I will check and get back to you.

It's a simple process, but the feasibility would come down to numbers. Most anodize in batches, and a 1 off would cost a lot more money.

 

[Epiphany]

I still can't get over the detail. I know what a pain it can be to make sure everything is right, be it design, machine work, anodizing, packaging, shipping, etc. The fact that somebody took the time to pre-apply adhesive in certain areas. That the leather fits perfectly into the respective groove on the toggle cover...I could not be more impressed. That Mark and Kevin worked together between England and the United States - much respect to both of you. Fantastic job.

I finished my install today and blew the dust off my Canon R5 along with a wide angle lens in hopes of capturing what I see now when I slide into the cabin. If this is bland then give me more!

Thanks again gentleman for making the GT500 better than it already was.

 

[marklboris]

I still can't get over the detail. I know what a pain it can be to make sure everything is right, be it design, machine work, anodizing, packaging, shipping, etc. The fact that somebody took the time to pre-apply adhesive in certain areas. That the leather fits perfectly into the respective groove on the toggle cover...I could not be more impressed. That Mark and Kevin worked together between England and the United States - much respect to both of you. Fantastic job.

I finished my install today and blew the dust off my Canon R5 along with a wide angle lens in hopes of capturing what I see now when I slide into the cabin. If this is bland then give me more!

Thanks again gentleman for making the GT500 better than it already was.

Thanks for the complement and those are some awesome photos. If Kevin wanted to use any of them for his website would that be ok? If not, it's no problem. Thanks

 

[Rapid Red]

I still can't get over the detail. I know what a pain it can be to make sure everything is right, be it design, machine work, anodizing, packaging, shipping, etc. The fact that somebody took the time to pre-apply adhesive in certain areas. That the leather fits perfectly into the respective groove on the toggle cover...I could not be more impressed. That Mark and Kevin worked together between England and the United States - much respect to both of you. Fantastic job.

I finished my install today and blew the dust off my Canon R5 along with a wide angle lens in hopes of capturing what I see now when I slide into the cabin. If this is bland then give me more!

Thanks again gentleman for making the GT500 better than it already was.

The factory start button looks the best IMHO

 

[Epiphany]

Thanks for the complement and those are some awesome photos. If Kevin wanted to use any of them for his website would that be ok? If not, it's no problem. Thanks

Absolutely, Kevin may use them as he pleases. I shoot for fun and if Kevin can use them to further his efforts, by all means, yes.

The factory start button looks the best IMHO

Crazy thing is I bought a start button from Kevin when I got the crown for the DCT knob and I can't find it. Otherwise, it would be in place.

Sponsored