Crazyhorse
Well-Known Member
Ahhh I see.
Sponsored
Correct. The GT will remain a coyote well past 2018.Assuming he's referring to the rumored flat plane crank V8 for an SVT version
So they're not for the ram effect when racing in reverse?Thanks for the nice comment my GM bretheren, and as long as they are past the radiator, which is the best heat exchanger for the motor, it will help pull heat out of the engine compartment, and increase airflow through said radiator. I'm am not saying they are functional because I do not honestly know. But if they are, they will increase air through the radiator.
Also think of the old Cleveland engine with either 2V heads or 4V heads, 2V heads were better for lower RPM power and 4V heads were better for upper mid and high RPM with Bigger Cam :ford:So this is for low end torque AND high end horsepower? I'm just trying to figure out why any physical restriction in the airflow pathway would be a good thing.
I just hope the ride is alot more comfortable on bumpy roads vs. Solid Live Axle suspension of the past now.Wow. Lots of updated goodies for the GT. This thing is going to be a screamer.
If it is at least as good as our Falcons, you will be pleasantly blown away by the improvement in all round driveability - handling dynamics and stability, breaking and traction over irregular surfaces, and yes even comfort (civilized).I just hope the ride is alot more comfortable on bumpy roads vs. Solid Live Axle suspension of the past now.
It's either that or a Dodge Challenger.:shrug:If it is at least as good as our Falcons, you will be pleasantly blown away by the improvement in all round driveability - handling dynamics and stability, breaking and traction over irregular surfaces, and yes even comfort (civilized).
It seems the new 5.0 Is going to be a serious "Game Changer" with major chasis and engine performance improvements.It's either that or a Dodge Challenger.:shrug:
I will know better once I test drive a new 2015 Mustang GT.It seems the new 5.0 Is going to be a serious "Game Changer" with major chasis and engine performance improvements.
I know I would be Dodging the Challenge...and grabbing the new 'Stang 5.0!! :ford:
Yes definitely big:clap2:Of course it does, it's a freakin whale of a car.
I agree with this as well. I personally don't want the added expense of DI on the motor. It performs well, but when researching parts for my EB FX4, I found that the stock fuel system is maxed in the 520-550HP range. I heard (from Full Race) there are some companies working on fuel system upgrades but I wasn't given names. I am a diesel guy and DI is an expensive toy I would prefer to avoid. Seeing some of the problems OEM's have had, it is something I would rather avoid. People have been making quad digit power numbers on our current fuel technology for a long time. I should be able to get by without it and have more money for other mods.Yes, they look to be functional heat extractors appropriately placed in a low pressure zone on the hood. They will also decrease front end lift.
Something to consider about this 5.0 revision…
This and any other upcoming pre-DI iterations of the coyote may be the last good engines for serious mods/boost for several years. If you want great factory performance the DI's will be great, but I suspect it will take the aftermarket a while to address anything that requires fuel system mods, and when it first happens it will be pricey.
This is one of the reasons I WONT be holding off for the refresh. I'll be happy to move to a DI car once the aftermarket has caught up.
That said, the internal upgrades are pretty impressive. It's definitely more then I was expecting and has me wondering just how badass the SVT will be. I've been told it is very ambitious and impressive. I'm not sure I buy the FPC rumors though.
I will be very pleased once DI makes its way into the coyote. I will never mod my motor (pun intended) to a point where a stock fuel system wont handle it. I plan nothing more than exhaust work, CAI if needed, a tune, and then springs and wheels. So, for my motor to come with DI just means that ill get an extra X amount of horsepower out of my car, and maybe a very slight increase in my gains from other small mods.I agree with this as well. I personally don't want the added expense of DI on the motor. It performs well, but when researching parts for my EB FX4, I found that the stock fuel system is maxed in the 520-550HP range. I heard (from Full Race) there are some companies working on fuel system upgrades but I wasn't given names. I am a diesel guy and DI is an expensive toy I would prefer to avoid. Seeing some of the problems OEM's have had, it is something I would rather avoid. People have been making quad digit power numbers on our current fuel technology for a long time. I should be able to get by without it and have more money for other mods.