PREORDER OPEN FOR GT350R's WING!

[Carbon Dynamics]

Is there anyway Carbon Dymanics could provide the proper nuts and bolts? Is the spoiler that fragile/easy to mess up?

The nuts are decent, but the ones up front a just a bit long. We will be revising the design and embeding the bolts inside the wing instead (like OEM spoilers). This wing is made from fiberglass, fiberglass are inherently fragile.

Sponsored

 

[tanna786]

Dustin, going to PM you with my number, please give me a call when you get a chance. Thanks.

 

[tanna786]

I'm wondering if I should wait for the revised wing, it's winter anyways and I'm really not in a hurry.

 

[cj－john]

What's your email? I will check.

Edit: We have not shipped international orders yet, and If I remember correctly, you wanted yours gloss, right?

Are you offering the Wing in Gloss Black？is it in production？

 

[Jeffy_2010]

Omg guys seriously read the original damn posts! The only color they are offering in at the moment is matte black, the are looking into doing gloss in the future, until then you can take it and have it painted what ever color you want

 

[Delta1Seven]

The first batch of people should have been notified last night.

Awesome! I got my email last night! I was just making sure I was checking the right email

I'm excited to show off this wing to my friends. I know it will get a lot of recognition at car meets.

Thanks for being awesome guys, stay awesome please :cheers:

 

[Carbon Dynamics]

Awesome! I got my email last night! I was just making sure I was checking the right email

I'm excited to show off this wing to my friends. I know it will get a lot of recognition at car meets.

Thanks for being awesome guys, stay awesome please :cheers:

Glad to hear! Post pictures when you have it installed! :cheers:

 

[opensesame]

This goes out to everyone who has ordered and most importantly, the ones who have theirs on the way. The inside 2 holes on both sides are thinner than the outside. 4 of the 8 bolts that are sent are too long. Long story short, go buy 4, m6-1.0 bolts and some extra washers to use as shims. DO NOT USE ANY POWER TOOLS. I did mine with a nut driver, by hand, and still messed it up. Thankfully this is my test wing and I have another on the way. Here's a pic of what happens.

For those with the spoiler delete, how many holes do we need to drill, and can we file the bolt down or need to purchase a shorter one?

 

[Sam@CarbonDynamics]

For those with the spoiler delete, how many holes do we need to drill, and can we file the bolt down or need to purchase a shorter one?

8 holes, 4 on each side. And yes, you can always cut the bolt to make it shorter.

 

[opensesame]

I noticed that this spoiler was installed flush to the trunk. The oem gt350r looks like it's an inch or half forward and doesn't look as awkward in the customer pic. Is it because he's using the original holes from the stock spoiler that came with his car? Mine is spoiler delete so I will be drilling fresh holes. Could be the camera angle.

Sent from my iPhone using Tapatalk

 

[Sam@CarbonDynamics]

I noticed that this spoiler was installed flush to the trunk. The oem gt350r looks like it's an inch or half forward and doesn't look as awkward in the customer pic. Is it because he's using the original holes from the stock spoiler that came with his car? Mine is spoiler delete so I will be drilling fresh holes. Could be the camera angle.

Sent from my iPhone using Tapatalk

Camera angle and because customer's car is on a slight slope. It's not a good comparison.

 

[opensesame]

Camera angle and because customer's car is on a slight slope. It's not a good comparison.

Yes that's what I thought because the customers pic the spoiler angle looks steeper than the OEM one. Can't wait for mine [emoji28]


Sent from my iPhone using Tapatalk

 

[Sam@CarbonDynamics]

Here it is from another angle.

 

[opensesame]

Here it is from another angle.

Much better angle. Thanks [emoji106]


Sent from my iPhone using Tapatalk

 

[bmfa]

I will agree that it is a bit farther back than the picture that Sam has. (But not much) I made it to where everything could be covered back up with the oem spoiler. That was just more of a personal preference.

Sponsored