What did you do to your S550 Mustang today?!

[_zOmbIE_]

NICE!

So when it comes time to replace them due to wear/tear, does the rotor just get replaced by removing it from the hat?

Probably a dumb question, but since I’ve never owned such a set of rotors, the answer will edumucate me…

Just in case you're wondering:

Pretty decent savings.

Sponsored

 

[James1980]

Installed a GT350 steering wheel. Feels so nice. Lets see how long I can keep it clean

 

[Cobra Jet]

Installed a GT350 steering wheel. Feels so nice. Lets see how long I can keep it clean

Just don’t grab it after eating Cheetos….

 

[Cobra Jet]

Yep! Just a quick rotor ring change and it's good to go.

Just in case you're wondering:

Pretty decent savings.

Thanks for the info fellas!

 

[BLUE DEVIL]

Drove it for the first time since Oct. of last year! No good reason it took so long, just life got in the way. Owning your own company is not conducive to spare time! Man I forgot how much I like my Stang!

 

[ice445]

Drove it again after a Vegas weekend with a rental Challenger. I like the Challenger, but my car is definitely a much better experience haha

 

[paulm1]

Installed the fulltiltboogie shiter bracket in my '21 gt. Best hundred bucks i've spent on this car to date. Easy install with some wobble 1/4" extentions. Did not have to source shorter bolts just cut the bushings out of the nvh device and reused. Love the shifts now, hopefully will cure the lockout.

 

[StangTime]

Installed the fulltiltboogie shiter bracket in my '21 gt. Best hundred bucks i've spent on this car to date. Easy install with some wobble 1/4" extentions. Did not have to source shorter bolts just cut the bushings out of the nvh device and reused. Love the shifts now, hopefully will cure the lockout.

Cool. I thought these brackets were for 2015 to 2017 only? I bought one of these 2nd hand and was told it wouldn't fit so I sold it.

 

[paulm1]

Cool. I thought these brackets were for 2015 to 2017 only? I bought one of these 2nd hand and was told it wouldn't fit so I sold it.

Site says 15-17. Mainly because of the the nvh device attached to the 2 lower bolts. FTB said it would work on 18 and up if you source the 2 bolts, same as the middle. I checked a couple ford dealers, neither had the bolts. So i ended up just pulling the bushings out out of the nvh bracket. Pretty easy, vice grip twist and the came right out. Cut away the plastic and rubber from the aluminum spacers and you can reuse the long bolts with just the spacer.

 

[StangTime]

Site says 15-17. Mainly because of the the nvh device attached to the 2 lower bolts. FTB said it would work on 18 and up if you source the 2 bolts, same as the middle. I checked a couple ford dealers, neither had the bolts. So i ended up just pulling the bushings out out of the nvh bracket. Pretty easy, vice grip twist and the came right out. Cut away the plastic and rubber from the aluminum spacers and you can reuse the long bolts with just the spacer.

Ah, I see what you did there. Wish I still had mine now that you told me how you did it.

 

[Prymetime1]

Finally got to installing a new shift knob and wheel spacers.

 

[GT Pony]

Finally got to installing a new shift knob and wheel spacers.

Did you change out the reverse lockout collar too? Does that knob just screw on without any other satisfactions needed?

Where did you purchase the knob from? ... link if you have it.

 

[Friend of Dorothy]

I didn't do it all of this myself, but my Twister Orange Stang now has over-the-top and side stripes fitted. I think the matte black stripes tones the orange down a bit.

Below is a prototype of blacking out around the headlamps I made from cheap vinyl that I have removed, but will re-install with proper 3M material one day soon. I think it gives the car a 'meaner' look.

 

[Cobra Jet]

I didn't do it all of this myself, but my Twister Orange Stang now has over-the-top and side stripes fitted. I think the matte black stripes tones the orange down a bit.

Below is a prototype of blacking out around the headlamps I made from cheap vinyl that I have removed, but will re-install with proper 3M material one day soon. I think it gives the car a 'meaner' look.

I really like that headlight blackout you did! I bet that could be done with Plasticoat too if vinyl isn't available.

 

[Prymetime1]

Did you change out the reverse lockout collar too? Does that knob just screw on without any other satisfactions needed?

Where did you purchase the knob from? ... link if you have it.

Got it from amazon. Direct replacement for s550. No reverse collar change. Unscrew old one, set the stop nut and locktight it on. Oh, make sure to check for reverse engagement before final tightening.

Sponsored