What did you do to your S550 Mustang today?!

[samd1351]

Added Rokbloxz front and rear. That was, interesting. After messing with the front driver's side for 15 or 20 minutes, got it figured out. The rears don't stick out as much as I thought, hoped? Almost wish I got the red in stead of black.

On a separate note, checked the bolts on the jacking rails, 6 of the 7 bolts holding them on were lose. Not super lose, but they had definitely loosened up.

And gave it much needed bath.

Sponsored

 

[GT Pony]

Also did you pay everyone to not be in that picture in what looks to be downtown? lol

Omega Man 2020.

 

[Blufc3s]

My buddy and I took another cruise and stopped for some seafood. We then travelled on to what is now an abandoned airport to play around a bit with my car and his19 A10. It used to be a drag strip that we ran at back in the 60s-80s; we’re both 76.
The dash cam video is me running my PP1 thru 1st-3rd. Apologies for no audio but my wife insists I turn it off so we can talk about people, and I forgot to turn it back on.

 

[acemastr]

Fixed my broken strut brace stud. Drilled out and put an OEM bolt I had lying around

 

[drjeff]

Ceramic coating done. The pics don’t do it justice- it’s like a mirror.

 

[lacanteen]

Dropped it off at the dealer for them to fix the dash that they broke. The only bright spot was that they gave me complimentary use of a loaded 2020 F-150 4X4 5.0

 

[ZachS]

MGW shifter installed on jack stands. That was a pain...

 

[GT Pony]

MGW shifter installed on jack stands. That was a pain...

What shifter knob is that? ... looks nice. Any side shots?

 

[Rinzler]

What shifter knob is that? ... looks nice. Any side shots?

Looks to be the Barton industries shifter.

 

[Dan243]

Installed the Ford Performance strut tower brace, much better looking than the stock GT brace. The quality is also a big plus.

 

[Spartan1]

Much needed washing after it spent a week outside so we could have our cabinets painted in the garage.

 

[ice445]

Fixed my broken strut brace stud. Drilled out and put an OEM bolt I had lying around

How'd you break it?

Installed the Ford Performance strut tower brace, much better looking than the stock GT brace. The quality is also a big plus.

That's the GT350 aluminum one basically, right? I think the stock GT one is about 7lbs, wonder how much that one weighs.

 

[Dan243]

How'd you break it?



That's the GT350 aluminum one basically, right? I think the stock GT one is about 7lbs, wonder how much that one weighs.

It weighs 2.5 pounds lighter

 

[Stage_3]

Drove it!

 

[frank s]

...go see some stuff. This is only like an hour from my house, lol.

My origin was in northeast Utah. Nice place to be, for the most part.

San Diego, California, offers pretty good, close access to some wonderful country, as well, without the benefit of a genuine winter season, although winter sports aren't that far away, either.

Got to put life into perspective from time to time.

Sponsored