Modifying As-Built Data Guide

[PKs]

Hi all,

I'm new to FORScan and have an Australian 2017 Mustang GT. I would like to change a few things if possible.

I've enabled Remote Start but it doesn't work. Do I need a different remote? Someone told me I didn't but I'm not so sure. Do I need to get the AS-BUILT values for this to work?

I've tried to enable Mirror Auto-fold but FORScan says it's not configurable. Is there a way around this. It'd be easier than remembering to press the button each time.

I got a fellow forum member (@Valiant ) to sort remote start on my 18 auto GT. It did require a new fob and I got two at the time. The fob has 4 buttons rather than the usual 3 for Aus cars of that vintage. My old two fobs also continue to function as they allways did. No other hardware was required but programming of the new fobs was required as was the turning on the software via Forscan.

Sponsored

 

[PKs]

Hi all,

I'm new to FORScan and have an Australian 2017 Mustang GT. I would like to change a few things if possible.

I've enabled Remote Start but it doesn't work. Do I need a different remote? Someone told me I didn't but I'm not so sure. Do I need to get the AS-BUILT values for this to work?

I've tried to enable Mirror Auto-fold but FORScan says it's not configurable. Is there a way around this. It'd be easier than remembering to press the button each time.

I understand that the only way to get your mirrors to fold on stopping and starting is to get an aftermarket electronic gizmo that fits inside your door and was designed for convertible roof folding but also has the mirror function. Probably needs a search on this forum. From memory it was not very expensive but did require some diy wiring.

 

[the_scotsman]

I understand that the only way to get your mirrors to fold on stopping and starting is to get an aftermarket electronic gizmo that fits inside your door and was designed for convertible roof folding but also has the mirror function. Probably needs a search on this forum. From memory it was not very expensive but did require some diy wiring.

I bought this one: https://vi.aliexpress.com/item/4000...st_main.5.33ee1802gdS1kW&gatewayAdapt=glo2vnm

Worked great for a week, then stopped working. Turned out it got soaked with rain water. The interior of the door cavity gets wet, and soaked the control board.

Considering buying another one, and sealing it in a plastic bag, as it worked great.

 

[DemonGT]

Trying to disable double horn honk and cant get it to work.

iv tried changing the original value to a 0 based off what the forsan as built spread sheet
said but that didnt work so i tried
Double Horn Honk Reminder (Engine on, Keyfob not in car):

Code: 726-41-02 0001 0001 0072 - Enabled

Change To: 726-41-02 0000 0001 0071 - Disabled

and im still getting the double honk when running with key in pocket.

 

[K4fxd]

and im still getting the double honk when running with key in pocket.

It won't turn off in my car either.

 

[MrBD1348]

Mine came back on after I had the BCM recall update performed

 

[DemonGT]

found my answer, this worked for my2021


Vlad Soare said:
To disable the double honk I used the code I found in the online spreadsheet. Be aware that there's one code until 2019 and another from 2020 onwards. For 2020+ it's this:
726-63-02: xxx0 xxxx xxxx

 

[Top Fuel Friday]

Interested if anyone figured out how to change the turbo boost gauge (for ecoboost/GT's) into the supercharger boost gauge from the GT500s on the dash cluster.

supercharger/gt500:

ecoboost / gt:

 

[bblackmoor]

I don't believe there is any market where the amber marker lamps are supposed to be off when the headlamps are on. The amber marker lamps are required. Removing them would likely make your vehicle fail any required inspection.

In Virginia, this is not correct. Front marking lights may be white, and they will pass the annual inspection. They must be amber when blinking.

 

[AngelDeath]

In Virginia, this is not correct. Front marking lights may be white, and they will pass the annual inspection. They must be amber when blinking.

This is also correct for NY, NJ, PA, CT, Mass & DE also.

 

[TexasRebel]

In Virginia, this is not correct. Front marking lights may be white, and they will pass the annual inspection. They must be amber when blinking.

white is not "off"

 

[bblackmoor]

I don't believe there is any market where the amber marker lamps are supposed to be off when the headlamps are on.

white is not "off"

If the amber marker lamps are not on, the amber marker lamps are off.

 

[Rationalbirch3]

Hello, I’m trying to activate my color for the door sills and end up buying everything like
The footwells and door handle lights I do have the wiring for them as well. I just need to know how to turn on the power and activate it with forscan if anyone can help me please? I have a Mustang 2020 EB fastback

 

[Buldawg76]

Hello, I’m trying to activate my color for the door sills and end up buying everything like
The footwells and door handle lights I do have the wiring for them as well. I just need to know how to turn on the power and activate it with forscan if anyone can help me please? I have a Mustang 2020 EB fastback

I have a 2020 EB premium, and the door sill and mirror puddle lamps are white, and I may be wrong, but I don't believe my color can be programmed to any color other than white.

If it can be then I will be of no help.

BD

 

[Rationalbirch3]

I have a 2020 EB premium, and the door sill and mirror puddle lamps are white, and I may be wrong, but I don't believe my color can be programmed to any color other than white.

If it can be then I will be of no help.

BD

You should be able to change your colors in the door Sills which is weird. Can you share your As built codes and also what BCM-B do you have? I have KR3T - 14D644-AA so i think this one doesn’t support my color even though I have the wiring.

Sponsored