mavisky
Well-Known Member
- Joined
- Nov 17, 2018
- Threads
- 10
- Messages
- 1,500
- Reaction score
- 1,853
- Location
- Cumming, GA
- First Name
- Kyle
- Vehicle(s)
- 2018 GT350
Also as a tip, be sure to clean out the remnants of the dried loctite in the uprights before you put the Caliperfexion studs in place. I took a dremel and slotted the factory bolts. Used a die to chase the threads, and then used those studs to run in and out of the upright. This will chase the threads and prepare them for installation of the studs.And I think it’s a misconception about the big front bolts being torque to yield. They are not. Manual says replace due to the locktite that comes on the bolt, not the torque.
Sponsored