Alignment bmr

[SrqGT]

So I just got my alignment everything is in the green, yet my rear tires seem to be not touching on the outer edge. Alignment was done by reputable shop.

Sponsored

 

[West TX GT]

What specs did you ask them for?

 

[SrqGT]

I believe they just tried to match factory

 

[SrqGT]

Rear camber is -2.2 and -1.9

 

[scott_0]

Rear camber is -2.2 and -1.9

wow! how low are you? they must not have even touched the rear camber, depending on how low you are, they can do better than those numbers.......

 

[SrqGT]

bmr lowering springs unfortunately the car got hit so after the repair I'll get it straight

 

[zuki_dan]

My camber was initially at -2.0 in the rear after installing my SP080 springs initially. The alignment shop I went to didn't want to touch the rear camber adjustment even though their alignment computer had instructions to do so.

I just had it aligned again the other day after calling and talking to Kelli about custom specs and still the alignment tech was grumpy and after barely adjusting the rear camber he didn't even attempt front camber adjustment even though I have camber plates installed and it is easy to adjust. BTW my rear camber is set to -1.0 but I have the BMR upper camber links installed.

 

[Gooner86]

Factory camber for the front is -.8 and for the rear is -1.2 isnt it?

 

[Bluemustang]

Factory camber for the front is -.8 and for the rear is -1.2 isnt it?

Yeah but he won't get that because he is lowered. I have CC plates up front and the best my alignment shop could get up front was -1.7.

 

[SrqGT]

So what do people suggest?

 

[Nasteg]

Yeah but he won't get that because he is lowered. I have CC plates up front and the best my alignment shop could get up front was -1.7.

Im on Sportlines and camber bolts i got -0.8 upfront

 

[scott_0]

Yeah but he won't get that because he is lowered. I have CC plates up front and the best my alignment shop could get up front was -1.7.

how low are you? my shop got me to -1 up front with MM plates and -1.5 in the rear with stock parts on BMR Performance springs

 

[Bluemustang]

how low are you? my shop got me to -1 up front with MM plates and -1.5 in the rear with stock parts on BMR Performance springs

Cool. Maybe the shop was fabricating that part. Good to know. I'm lowered at least an inch front and rear- more like 1.5" in front. I do know that my front ride height is half an inch lower than the rear. According to Ford these springs should drop everything about an inch but the front is indeed a bit lower.

According to them, they couldn't take out anymore camber in front- that the CC plates didn't offer enough adjustment that way. And that the car would handle corners better with more negative camber. It actually fits my driving style because I am more of a corner carver than straight line WOT anyway.

Sponsored