Accelatec Resonated X-Pipe With Active Exhaust

[gameovergt]

Oh sorry
Yeh this thing is a piece of shit

lol. Yes sir

Sponsored

 

[Bossdog]

My H pipe arrived to day and I removed the Accelatec . Just waiting on the Vibrant resonators, looks like they got delayed as they were supposed to be here today.
the Accelatec and the C&L H-pipe are exactly the sale Length. As far as I can tell the 4”x12” vibrant resonators will fit side by side but it will be very tight fit

 

[Leigh_bullitt]

My H pipe arrived to day and I removed the Accelatec . Just waiting on the Vibrant resonators, looks like they got delayed as they were supposed to be here today.
the Accelatec and the C&L H-pipe are exactly the sale Length. As far as I can tell the 4”x12” vibrant resonators will fit side by side but it will be very tight fit

They should fit fine.
Would their be any advantage to having the resonators staggered ???
One at the top and one at the bottom of the h pipe?.
as opposed to being parallel?.
May change the exhaust pulse ?

 

[Leigh_bullitt]

My H pipe arrived to day and I removed the Accelatec . Just waiting on the Vibrant resonators, looks like they got delayed as they were supposed to be here today.
the Accelatec and the C&L H-pipe are exactly the sale Length. As far as I can tell the 4”x12” vibrant resonators will fit side by side but it will be very tight fit

Glad to see that Acceletec off the car

 

[Bossdog]

Resonators arrived! Looks like the 2 resonators Will definitely fit side by side, with a 1/4” to 3/8” gap remaining between them.
off to the welder!

 

[Leigh_bullitt]

Resonators arrived! Looks like the 2 resonators Will definitely fit side by side, with a 1/4” to 3/8” gap remaining between them.
off to the welder!

Yeh they will fit perfectly.

 

[Leigh_bullitt]

Yeh they will fit perfectly.

How did this go ???

 

[Leigh_bullitt]

Yeh they will fit perfectly.

Resonators arrived! Looks like the 2 resonators Will definitely fit side by side, with a 1/4” to 3/8” gap remaining between them.
off to the welder!

How did this go ??

 

[Bossdog]

Still sitting in a pile in my garage. My welder was on vacation last week and pushed me off this week.

 

[Bossdog]

I got the replacement for the Accelatec resonator from my welder yesterday.
The 4" diameter x 12" long Vibrant resonators fit in the C&L H pipe very well.

Also, I got a message from CJ Pony that they would refund the purchase price of the Accelatec mid exhaust resonator, but I needed to send them pictures that is was destroyed beyond use as they did not want it back. I appreciate CJP being "Stand-up" about the issue and refunding the purchase.

I won't get it installed till Sept 15. Not sure when I'll get to run the car as I have the front end tore apart to add the Mishmoto Engine oil cooler and the kit has not arrived yet.

 

[Bossdog]

I got the mid exhaust installed. I am also installing an engine oil cooler so the front end is off. Everything is installed so I was able to start the car on the lift with no front wheels and no front fascia. The exhaust sounds AWESOME! Just as I had hoped. Now I still haven’t gotten it out in the road but so far so good.
I will post some pics and a sound video tomorrow. It’s a very simple solution and exactly what I was hoping for, loud but not too loud, No Rasp (yet). I’ll have to wind it out on the street for the final analysis.

 

[Bossdog]

Heres a pic installed. It actually fits in the space better than the accelatec. The accelatec drooped Down and it was actually welded that way. When you set the resonator on the ground with the resonator weld seam down, the pipes were close to the ground. When you flipped it over in the weld was up attachment pipes were further away from the ground.

 

[Leigh_bullitt]

Heres a pic installed. It actually fits in the space better than the accelatec. The accelatec drooped Down and it was actually welded that way. When you set the resonator on the ground with the resonator weld seam down, the pipes were close to the ground. When you flipped it over in the world was up attachment pipes were further away from the ground.

Looks great.
How would you say it sounds compared to a regular H-Pipe ?.
guessing it’s a deeper sound without the rasp.
I’ve got all the bits ready to do this but finally installed a switchfire which has been fantastic too.

 

[Bossdog]

Looks great.
How would you say it sounds compared to a regular H-Pipe ?.
guessing it’s a deeper sound without the rasp.
I’ve got all the bits ready to do this but finally installed a switchfire which has been fantastic too.

Correct, no rasp!

 

[Leigh_bullitt]

Heres a pic installed. It actually fits in the space better than the accelatec. The accelatec drooped Down and it was actually welded that way. When you set the resonator on the ground with the resonator weld seam down, the pipes were close to the ground. When you flipped it over in the weld was up attachment pipes were further away from the ground.

Any reviews yet to how this is sounding ?

Sponsored