11's all the way around?

[Broid]

Been looking at new wheels and tires for my 2020 GT350, and a couple of suppliers I've talked to suggested 11's all the way around. Anybody done that? And what would it matter?

Sponsored

 

[cynicalwill]

Been looking at new wheels and tires for my 2020 GT350, and a couple of suppliers I've talked to suggested 11's all the way around. Anybody done that? And what would it matter?

I was consider the same thing. Looking for to the responses. I haven't seen any threads regarding this topic lately.

 

[luc]

Like that you can run 305 all around instead of 295 on the front. Better handling, less understeer

 

[TicTocTach]

You can do it with +50mm offset in back and +25-30mm in front… or +50mm on all four if you use 20-25mm spacers and long wheel studs up front. I went square with -2.0* camber and love it. 305/30-19, no rubbing.

 

[Broid]

You can do it with +50mm offset in back and +25-30mm in front… or +50mm on all four if you use 20-25mm spacers and long wheel studs up front. I went square with -2.0* camber and love it. 305/30-19, no rubbing.

Very helpful, thank you!!

 

[NightmareMoon]

The only downside is the car can follow grooves on the highway a little easier when the tires get old. That, and the common 305/30 sized tires are a little shorter and wont fill the fender as well as a 295/35.

this one is a GT so the wider 350 front fenders do a little better job covering the tires.

 

[JayhawkGT]

You can do it with +50mm offset in back and +25-30mm in front… or +50mm on all four if you use 20-25mm spacers and long wheel studs up front. I went square with -2.0* camber and love it. 305/30-19, no rubbing.

what wheels and size wheels (19x?)are those?

 

[TicTocTach]

what wheels and size wheels (19x?)are those?

These are GT-7’s from LMR in 19x11+50. They were discontinued a couple years ago, but I hope they come back sometime.
There is another place that makes similar wheels - replicas if the current Ford GT wheels - but they are much more expensive.

 

[shogun32]

I have a nib set of the gt7 (well sve's white label version, which is the identical wheel from the same factory that makes MRR) in 19x10/11 set as well as 20x11. I need to post them again.

I have the 19x11et24 for the fronts on my car so no need for spacers. Can't rotate them obviously.

You can still get the wheels on ebay.

 

[DarrenMRRWheels]

I have a 19x10 or 19x11 M600 in stock. We had to replenish some inventory at our factory... Available,

 

[Ewheels]

19x11 all around will fit perfectly on your car. Please don't neuter your amazing car by doing the 19x10/19x11 stagger. These cars love front grip and will take as much as they can get.
19x11 wheels with 305/30 tires all around is the golden setup for S550's

 

[Broid]

19x11 all around will fit perfectly on your car. Please don't neuter your amazing car by doing the 19x10/19x11 stagger. These cars love front grip and will take as much as they can get.
19x11 wheels with 305/30 tires all around is the golden setup for S550's

Thanks Eric! Good word...

 

[DarrenMRRWheels]

^^^^ 19x11 +50

 

[Vman07]

I'm only here because I'm a genius and thought OP was another genius who meant 11'' wheel diameter and not the width

 

[Broid]

I'm only here because I'm a genius and thought OP was another genius who meant 11'' wheel diameter and not the width

CLEARLY you thought wrong...

Sponsored