'16 GT, sleeved Predator and F1A94

[80FoxCoupe]

Now that’s an awesome setup!!

Not bad for a lightweight deal.

Sponsored

 

[80FoxCoupe]

I had the transmission freshened up and trying out a different gearset. First gear really hammers the tire, this setup should be more manageable. Trans is back in the car and will make some passes tonight.

 

[Strokerswild]

Tow pig update. The 5.0, 10r80 and 3.73 combo is badass. It would pull the car 125mph if you had the nuts to do it. Ported 21 GT intake, afe inlet, 3in cat back, tuned, eaton truetrac diff in rear, Ridetech suspension with traction bars and airbags. Got almost all from @beefcake , hopefully sponsor me a blower soon LOL. Got parts fast and at a great price as usual!

Intrigued. I've thought about a GT intake swap on my '19 RCSB 4X4 (3.55 axle) now that the warranty is up. Any buggery required?

(And yeah, the RCSB trucks with the 5.0 are pretty awesome.)

 

[80FoxCoupe]

Intrigued. I've thought about a GT intake swap on my '19 RCSB 4X4 (3.55 axle) now that the warranty is up. Any buggery required?

(And yeah, the RCSB trucks with the 5.0 are pretty awesome.)

Wait, you got one too? Need a pic asap! All you need is the PCV hose from pass valve cover to intake manifold from a 2018 gt. It's like $24 from the dealer. Other than that there are no other changes. I can get u the part number if needed.

 

[Strokerswild]

Wait, you got one too? Need a pic asap! All you need is the PCV hose from pass valve cover to intake manifold from a 2018 gt. It's like $24 from the dealer. Other than that there are no other changes. I can get u the part number if needed.

Just a hose??? Awesome, let me know the part number when you have a chance.

Older pic, but representative:

 

[80FoxCoupe]

Here's the PN. I just color matched a set of paintable bumpers, and have Morimoto XB hybrid led units and fogs ready to go in next week.

 

[80FoxCoupe]

Made some hits on Friday with the new 2.05 gearset. Unfortunately the surface would not hold the radial. In the next 2 weeks there are some radial prep dates on the calendar and hopefully see some success...

 

[80FoxCoupe]

Tow pig update. Color matched bumper and Morimoto headlights and fogs installed. Got the Morimoto lighting from @beefcake super fast and at a killer price.

 

[vinny89gt]

Some beautiful toys you have, @80FoxCoupe .

Impressive build on the S550.

 

[80FoxCoupe]

Ok one more in the sun LOL

 

[80FoxCoupe]

Was able to make a few passes today in the 90deg heat. New PB! Palm Beach Dyno, Procharger and Extreme Automatics/ Circle D got this thing running good. 7s in better air no problem. Leaving low at 4800 and ran the soft tune up, so there is more meat on the bone. Also I'll be testing another intake manifold soon!

 

[RoadCone]

Was able to make a few passes today in the 90deg heat. New PB! Palm Beach Dyno, Procharger and Extreme Automatics/ Circle D got this thing running good. 7s in better air no problem. Leaving low at 4800 and ran the soft tune up, so there is more meat on the bone. Also I'll be testing another intake manifold soon!

CONGRATS!! Clean build and coming together! Will be in 7z soon!

 

[Frank's 2018]

Congrats on the new best! That 35 mph back half is great in the heat.

 

[beefcake]

killer

 

[80FoxCoupe]

killer

Shout out to Beef for parts on the car and truck!!!!!

Sponsored