What did you do to your S550 Mustang today?!

[Doolin64]

Pinch seam got me. Had to cut the exhaust a little more and adjust the alignment. Now to order up a new harness.

Sponsored

 

[GR1MxREAPER]

Did some front end changes today. Installed the Bullitt Style upper and lower grilles and the PP2 splitter. Also installed the amber delete kit on front headlights. Turned out awesome. Eibach sportlines and kooks longtubes get installed at the end of the month. Cars coming along nicely.

 

[m3incorp]

Thanks a lot, will do that.

Put them on, its very easy. Here's an install video, should be pretty much the same for the Steeda version
watch

I drove the car, I feel like I noticed a difference right away. I'm also willing to admit that it could just be in my head.

 

[TrackMustang]

Did some front end changes today. Installed the Bullitt Style upper and lower grilles and the PP2 splitter. Also installed the amber delete kit on front headlights. Turned out awesome. Eibach sportlines and kooks longtubes get installed at the end of the month. Cars coming along nicely.

Looks good

 

[Cobra Jet]

Just bought a ROUSH CAI from AM - currently in the install process (Update: I dropped my screwdriver in the fender crack 🫠)

Do yourself a favor too - add an Outerwears micron pre-filter to the conical; it will save you maintenance intervals, keeps the conical much cleaner, make that conical last practically forever. It will NOT obstruct air flow, don’t listen to any BS myths about pre-filters like the Outerwears.

You'll thank me later when it cuts your conical maintenance down to -0-...

Check this thread for what I’m referencing:
https://www.mustang6g.com/forums/threads/pre-filter.160216/#post-3265100

 

[Cobra Jet]

Pinch seam got me. Had to cut the exhaust a little more and adjust the alignment. Now to order up a new harness.

For those concerned about the AE harness chafing on the sharp edges of the pinch welds, or other similar areas under the chassis…. Just buy a roll of black door edge guard and place it over the pinch weld (or other areas of concern).

Similar to this product and make sure it’s the type with the adhesive inside the channel:
https://www.amazon.com/Black-Guard-Molding-Models-D-I-Y/dp/B0055TQ87A

 

[TonyNJ]

Said goodbye and handed it over to its new owner in Toms River, NJ. I almost turned around halfway since I wasn’t selling it out of need but after 5 years, felt it was time for something new. It just seemed like the right time if there ever was one. The only gut wrenching feeling is that although I can always buy another one if the urge hits again, I won’t be able to get one like THIS one. Thanks Mustang 6G. Even though I have something incoming in a few months, will need a little therapy the rest of the week

Hey brother. How you been doing since selling your car? I just saw this post now and sensed sadness. You hanging in there? What's up the new whip?

 

[sube83sti]

Did some front end changes today. Installed the Bullitt Style upper and lower grilles and the PP2 splitter. Also installed the amber delete kit on front headlights. Turned out awesome. Eibach sportlines and kooks longtubes get installed at the end of the month. Cars coming along nicely.

More pictures please. Thinking of the same combo on my Magnetic.

 

[Nodster]

Fitted my Steeda intake the other day.
https://www.mustang6g.com/forums/threads/steeda-intake-just-unlucky-poor-quality.175533/

 

[Stage_3]

Drove it again yesterday.
Racking up the mileage. As of yesterday,......2,225 on the clock. LOL

 

[Bullittproof16]

Recently installed this titanium shift knob and reverse lockout custom made by WC Lathe Werks. It was flamed purple and really changes up the look in the cabin. It's also made SO well... can't beat the quality. I have been following this guy on instagram (@wc_lathewerks) for years and finally bit the bullet. Check out his stuff! WC Lathe Werks

 

[Turning Blue]

Friday I had 3M Crystalline, 20% tint applied to all windows, except the windshield. Also added a subwoofer, replaced the door speakers and disconnected the center speaker (9 speaker system).

 

[Weyland-Yutani]

Tidying up body shop leftovers from a year ago.

Is the missing piece(s) in the picture the same as the piece holding the net above it?

I'm thinking it's W716357-S900 and W715518-S439 but the illustration doesn't look right.

 

[raptor17GT]

would like to get the part number for the bit in blue as I have threads on all four holes but only three

 

[Chef jpd]

Its not just the nut, there is a captive stud that is required also.

And yes, it is the same item as the top

Looks like it might be 5,6,7 from the schematic.

Sponsored