What did you do to your S550 Mustang today?!

[nustang]

Right, mainly the socket adapters I know electricians and inspectors don't like. But hey, previous owners of my house ran an extension cord through drywall into the ceiling to plug in an extension cord behind the drywall. Added single outlets but really I should have whole new circuit for the garage openers apparently.

I am somewhat curious about the LED lights tho. I've bought some of those you hang on a chain from trusses for our barn with plugin cord, those are great, but the ones the person has do look pretty nice and bright.

yeah .... just for starters - is that a 3 pin socket adapter with ground? lol. thats a joke btw ... Just cause previous homeowner ...... its still not right. Worst thing I can call someone is a 'homeowner'. From a tradesman's perspective. anyway
When one sells, home inspector wont miss that garage wiring, and if they suspected extension cord in the walls, well ... Qfter a fire, the inspections find homeowner wiring ... claim denied.
There are surface wiring methods that arent too expensive and you wont have to take down the drywall. EMT, eg.

Sponsored

 

[degajake]

Wheels and suspension

 

[Gnatsum21]

Cleaned my rear window (inside) with some gadget I got from Amazon. Worked like a charm. Does not come with cleaner. I used Windex.

 

[1 old racer]

Cleaned my rear window (inside) with some gadget I got from Amazon. Worked like a charm. Does not come with cleaner. I used Windex.

I use the same set up for years and highly endorse this product and i use it on all windows on all my cars.

 

[JnBama]

I have the same spare and my jack fit. Or do you mean actually putting it in the middle, sitting the tire down on it and screwing it down? In that case mine doesn't fit either, I have it wrapped in padding and it sits underneath the tire, just not in the middle.



Huh, weird! I would have thought there's a backup manual release. I guess there is, it's the fluorescent escape pull....

Jack has large pads won't fit under tire

Source for the Schumacher jumper?

Advance Auto parts

 

[sopherland]

Installed the Steeda low profile full length jacking rails on my 2021 GT. Was a fairly straight forward install didn’t even need to jack the car up (stock height).

 

[Gnatsum21]

Installed the Steeda low profile full length jacking rails on my 2021 GT. Was a fairly straight forward install didn’t even need to jack the car up (stock height).

Ordering them now! Keep forgetting..

 

[robsmack01]

Ordered SVE SP2’s this morning from LMR, put on this afternoon. Very convenient living 6min away. 10,11’s stock height

 

[Spartan1]

Ordered SVE SP2’s this morning from LMR, put on this afternoon. Very convenient living 6min away. 10,11’s stock height

Nice ride, now paint the calipers black and finish it off!

 

[BigR4444]

Ordered SVE SP2’s this morning from LMR, put on this afternoon.

....WUT?!

*Me waiting for the wheels I ordered in September...*

 

[robsmack01]

Nice ride, now paint the calipers black and finish it off!

Putting Brembo calipers on front this wknd. Idk if I’ll do anything to the rear

 

[wa9njm]

Bought it on the 8th. (2021 GT, 401A) Installed BMR jacking rails on the 10th I'd pre ordered. Had the Ford power package installed at a dealer today. (The fordpass reward points they gave me for buying the car paid for it, so nice way to keep the warranty intact.). Tomorrow resonator delete and H-pipe install.

 

[1972_todd]

I keep staring at the wiring up in the ceiling. Looks like socket adapter to a plug, then the LED strips have a light switch at the ceiling?
I realize you have the lights on a switch. But I've been always "taught" or always thought you should convert light fixtures to receptacles if they're to be used that way, but I suppose the way you have it is a fairly clean install too...

They can be hard wired in as well. Figured I would give this a shot first considering the amount they’re on. Gives great light so far. Couldn’t work on car projects at night, now I can.

 

[JohnnyGT]

Met a fellow member and picked up something new to try.

The Switchfire doesn't seem to fit after cutting out the resonator for the Steeda H-pipe before. Muffler side pipes are too short now. It was a major disappointment when realizing.

For the Steeda pipe it was cut so they butt up together. The Borla piece is a slip on on both ends, so it needs more pipe on the muffler side. Found that out when a muffler fell on @EmCel's face.



Got a quick open header vid during the process at least.:



I can put the Steeda pipe back...or you all can wait.

Thanks to @EmCel for the assist. Small hand wrenching, moral support, and vid taker.

 

[EmCel]

omg

Sponsored