Non-CFTP 4, 5 or 6 point harness?

[NGOT8R]

Roll up with a zip tie is what I do in all of my cars.

Copy that, thanks! I need to pick up some longer zip ties and I’ll get it done.

Sponsored

 

[Shelby2]

Thanks Adrian. I did have to bend the rear brackets but not the front and I did not have to make any modifications to the trim panel. Each belt takes 4 grip pins and 4 were sent in one package. I too used thin zip ties to secure the excess strap in the rear after rolling it up.

 

[Goose17]

If you don’t want to cut/trim your interior panels to get the lap belt connected to your car, you can go the route I chose... skip to 36:40.

 

[newmoon]

I recently installed the latest version of the Schroth QuickFit Pro 4 point harness.

Looks good. Was everything you needed included in the kit? How was the install?

 

[Shelby2]

Thanks. Everything was included with the exception of the grip pins which are optional. Install was easy. Just be cautious when you pull the trim panel as it could scrape against another section of trim near the upper back corner of the side window.

 

[NGOT8R]

it's about FRIGGIN' TIME! How many years does it take to source the correct belt tongue when you get multiple emails (probably weekly) asking for an updated product?

Thankfully, I didn’t have to wait long. I ordered mine 3 weeks ago and there was a 2 week wait. At that time, I was told that they couldn’t make the harness in any color for 1-2 weeks. Not sure what that was about. My grip pins are on back order. Other than that, the only complaint I have (and it’s a minor gripe) is, I ordered my harness with the gray patches with black lettering and the one I received have black patches with yellow lettering. I installed the leather shoulder pads, so the patches are no longer visible...problem solved.

 

[Cgouzoulis]

If you don’t want to cut/trim your interior panels to get the lap belt connected to your car, you can go the route I chose... skip to 36:40.

GREAT FRIGGEN VIDEO!!!! Thanks for this

 

[JN66]

This part is from my GT350 order (red), and a pix of my GT350 install. My GT500 is identical except I got the belts in gray/silver.

looks great! What did you anchor the harness to if you don’t mind me asking?

 

[The Chairman]

looks great! What did you anchor the harness to if you don’t mind me asking?

It mounts to the normal seat belt locations.
https://www.schrothracing.com/item/schroth-quickfit-pro/
Clean installation and easy to remove.

 

[JN66]

It mounts to the normal seat belt locations.
https://www.schrothracing.com/item/schroth-quickfit-pro/
Clean installation and easy to remove.

Thank you kindly.

 

[Go Time]

If you don’t want to cut/trim your interior panels to get the lap belt connected to your car, you can go the route I chose... skip to 36:40.

Great video. Why did you opt for their rear seat delete instead of leaving the OEM?

 

[fishpick]

Great video. Why did you opt for their rear seat delete instead of leaving the OEM?

@Go Time That's how the Carbon Fiber Track Pack GT500 comes - no other choice.

 

[Goose17]

Great video. Why did you opt for their rear seat delete instead of leaving the OEM?

I did not want to cut my original. I also like the aftermarket one I installed... it’s a flat shelf with a separate back piece.

 

[16Kobra]

I did not want to cut my original. I also like the aftermarket one I installed... it’s a flat shelf with a separate back piece.

I have two (2) oem rear seat deletes and still opted for the aftermarket like you did. Going to put the OEM's on the shelf.

Sponsored