StangTime
Well-Known Member
- Joined
- Apr 16, 2019
- Threads
- 77
- Messages
- 3,491
- Reaction score
- 3,884
- Location
- Ontario 🇨🇦
- First Name
- Todd
- Vehicle(s)
- 19' GT PP1 Manual
If you are grabbing the signals between the HU and the amp then you are using low low level signals. As Din says:I was referring to using an audiocontrol DSP/AMP that takes those high level inputs and converts them to line level and then you can tune to your liking via the DSP using the RTA feature. Mine personally taps off of the HU for a full signal and then I just sum them on the other channels, set the xover and then I will feed those back into the speakers. The stock amp will sit there but not be connected to the speakers but is still connected to the HU.
Sponsored