Malikm84
New Member
what to do if forscan is not showing Apim as built format and i have everything plugged in correctly and the screen sync 3 screen does not turn on but the control panel works ?
Sponsored
Should be able to just use existing if its a 2019I Have a 2019 non premium GT with the 4” screen. I already got a 8” screen, apim and bezel without heated seats. The usb from the bottom of the used bezel is missing. Can I use my original one or do I have to get a different one?
Forscan codes - this will get the toggles working correctly:I’m looking for some help with acting drive modes on my 19 mustang after I swapped to sync 3. I have forscan just need to know what to change ? Thanks any help would he appreciate
Have you gotten an answer on this? I have the same problem...I recently did a 4 to 8 swap in my 2018 mustang gt base. Everything seems to work fine except for the Bluetooth calling. Whenever I go to make a phone call it acts as if its making the call but then the radio just turns on and they is no audio for the phone. Has anyone ran into this problem?
Mode toggle@Gonzar which toggle switch? I ask because I have a 2017 as well and my track toggle switch does nothing. Hextall and I went through all my code and it looked good. We thought the switch might be bad (which it really might be). When I saw the post from you, it peaked my interest.
TSame here. I will be getting a new bezel when they become available as mine was used to see if it fixes my mode toggle. But, we have the same toggle not working. Any one else with a base 17 have this problem.
Don't know if it makes any difference, but mine is a 6R80 transmission.
look up Michael berry (my Mustang update) on youtube he talks about the same issue but after forscan it got fixedSame here. I will be getting a new bezel when they become available as mine was used to see if it fixes my mode toggle. But, we have the same toggle not working. Any one else with a base 17 have this problem.
Don't know if it makes any difference, but mine is a 6R80 transmission.