Search results

Anyone have any input. I upgraded my acm to use xm radio and it won’t work. It shows up on screen shows Chanel but won’t let me change them and won’t show the esn number for it

So will this swap loose rev match on down shift and the gear indicator on the dash on a 2019 ?

Did anyone have to change the tune or change a setting in forscan after swapping gear

I had to reinstall my factory set up and get ford pass working then I put the 8in back in, all works now

So I would need to swap the flange ? Swap

just looking for info. 2017 trac pack diff with torsion 3:73 can I swap that into my 19 manual. Would the piñon flange need changed or direct fit ? Thanks for any info

I have a roush supercharger and I think with the gearing of the 19 and a 3:73 will be perfect 👌

So on a 19 6speed going to a 3:73 from a 3:55 no tune or program needed ?

So I made the mistake and did a master reset I really don’t want to go and swap radios out to get Ford pass to work. Someone mentioned you can program the vin to get this to work using forscan. Can someone tell me where to do this ?? Thanks

Any suggestions on what should be done ?

Don’t have engineering number. Got it out of a 2018. And only changed some of the as built data for drive modes

Question I did the sync 8inch swap on a 2020 and now the Ford pass app shows my car is in deep sleep mode and the remote start don’t work. Any tips or tricks ?? Thanks in advance

Anyone have the asbuilt codes to enable drive modes and fix hazard switch. 2020 auto

You need to program the sccm you need to program the sccm using forscan so the pony button works

I have a rattle between 1800 and 2500 took to a dealer said it was normal also

Just did the install on my 19 base. Got all features working awesome work on this write up and a huge thanks to p6cl for all the info you guys rock

I did not. I looked up the codes. Thanks for the info got it back working

Can anyone help me. I was using forscan abs to make some changes to my apim in my 19 mustang and now the climate control button is gone can anyone give me the location and block numbers I need ??

I found the info I need right in here

I’m looking for some help with acting drive modes on my 19 mustang after I swapped to sync 3. I have forscan just need to know what to change ? Thanks any help would he appreciate