9.21 at 156.79mph

[Burnin4]

I made a trip to Darlington, SC last night, made a few passes. I'm still working on my 60ft, wasn't able to get her off the line very well, wasn't standing on my 2step long enough to build any boost, thinking about installing a trans brake. Conditions were ok, DA was 1420ft, 79 degrees, and the lines were not too bad. My MPH will easily get me into the 8's, 155-156 on all 3, on 22-23psi. I was on the same tank of e85 and same tune from WannaGoFast last week, 190mph.

Hope you guys don't get tired of my vids/posts, I'm fairly dedicated to sharing all of my results with the community :cheers:

Sponsored

 

[RockStang]

Awesome runs. Not familiar with your build but that is smokin fast.

 

[Burnin4]

Awesome runs. Not familiar with your build but that is smokin fast.

Thanks! I have an MPR sleeved/built motor, Hellion Twin 62's, trackside tuning from PBD/Bjonnes, built by Boosted Performance in Mooresville, NC.

 

[HELLION TURBO]

Congrats!!!!

Keep it up! 8.99 is coming soon!

 

[phunk]

Hope you guys don't get tired of my vids/posts, I'm fairly dedicated to sharing all of my results with the community :cheers:

Awesome results, and thanks for sharing. I would just recommend creating a signature with your major mods breakdown and dyno results - I know I was curious and it would probably help.

 

[Burnin4]

Awesome results, and thanks for sharing. I would just recommend creating a signature with your major mods breakdown and dyno results - I know I was curious and it would probably help.

Thanks! Hopefully my mods populate in my Sig now....

 

[BMR Tech]

Good work Austin, keep it up.

 

[Burnin4]

Good work Austin, keep it up.

Thanks Kelly. I need a new set of sprangs, will you pm me the part#'s for fronts and rears? I have the Performance springs on my rear and stockers on my front for clearance/turbo piping, but want the "proper" bmr springs for my setup. 18x9's in the front, 17x10's in the rear, let me know what i need, thanks!

 

[BDMACH1]

Congrats man...That's FLYIN!

 

[gearhead2685]

Damn that thing moves!!

 

[BMR Tech]

On it Austin!

 

[olaosunt]

Congrats again man/Hellion bro!
I am so jelly right now! Your are trapping faster than some of the 8 second cars on the list so only a matter of time before you join that club.

Ever thought of doing the double piston rear drag brakes from aerospace ?
I just had mine delivered but can't test it out for you as my car is down.

It should help turbo cars build boost at the line as it will hold car at higher rpm.
I am hoping it will help my 60 ft.

Then there was the guy who said he had a bump box/trasnbrake combo that would not break your transmission .No recent updates .

Hope to join you soon in the 150+ mph club (and 8 sec ) soon.

 

[olaosunt]

Damn !
Just watched the video.Car sounds awesome too .Just seems to purr without any trace of smoke/steam out of the exhaust .Must be tuned to perfection .

 

[olaosunt]

May be lose some weight ?
With the aerospace front and rear you could drop close to 100 lbs of unsprung weight most of which is rotating mass from the rotors .
That's my plan anyway .
Even more if you ditch the 18x9 fronts for 17x4.5 skinnies
Corbeau front seats and rear seat delete could be another 100lbs.

 

[Brent Davis]

Great passes man. What converter you using as well?

Sponsored