The big Intercooler thread.

[stormtrooper]

Will yall have charge pipes available soon? Or no?

Sponsored

 

[JerseyDevil]

Will yall have charge pipes available soon? Or no?

Yes we are almost done with the prototyping BUT we are developing a silicone charge pipe/intake comb that takes a lot of bends and volume out of the system! our charge pipes are 1 piece custom silicone for each side as well as the silicone cold air intake which will place the filter on the passenger side of the car with an integral velocity stack. When we do our initial prototypes we will get a few made for end user testing!

 

[BigCatDan]

We will start shipping late this week/early next week. Price for the initial units is $729 plus shipping. If you wanted to reserve one simply PayPal us a $100 deposit to
[email protected]
And we will contact you fpr full payment when we are ready to ship!

Our town got hit with several tornados last night so I'm in and out trying to clear the downed trees, just an fyi if I don't get right back in a mssg!

1) ic is blocking the radiator. Will this increase engine temp or make the car more prone to overheating?
2) will there be instructions included on how to install with the purchase. Or a video?
3) how are you going to support installation issues or questions? Email? Phone?
4) Does the front bumper need to come of for install?
5) has this been tested to fit a stock EB and a PP ecoboost (larger radiator)

 

[JerseyDevil]

1) ic is blocking the radiator. Will this increase engine temp or make the car more prone to overheating?

- we have ICs on multiple platforms and none have any issues with coolant temps.or upper core in this platform is only 2.1" thick(vs 3-3.5" of other front mounts) combine that with the rounded header bars which translate into less pressure drop through the core to the radiatior...

2) will there be instructions included on how to install with the purchase. Or a video?

-Yes we will put out an install FAQ video

3) how are you going to support installation issues or questions? Email? Phone?

-Email is always the best as we are always checking it. their should be no issues as we use factory correct geometry and only 2 bolts/nuts for mounting.

4) Does the front bumper need to come of for install?

-Yes the Bumper needs to come off and the louver system removed.

5) has this been tested to fit a stock EB and a PP ecoboost (larger radiator)

-We designed it on a stock EB but left some space behind the upper face for a thicker radiator!

 

[BigCatDan]

1) ic is blocking the radiator. Will this increase engine temp or make the car more prone to overheating?

- we have ICs on multiple platforms and none have any issues with coolant temps.or upper core in this platform is only 2.1" thick(vs 3-3.5" of other front mounts) combine that with the rounded header bars which translate into less pressure drop through the core to the radiatior...

2) will there be instructions included on how to install with the purchase. Or a video?

-Yes we will put out an install FAQ video

3) how are you going to support installation issues or questions? Email? Phone?

-Email is always the best as we are always checking it. their should be no issues as we use factory correct geometry and only 2 bolts/nuts for mounting.

4) Does the front bumper need to come of for install?

-Yes the Bumper needs to come off and the louver system removed.

5) has this been tested to fit a stock EB and a PP ecoboost (larger radiator)

-We designed it on a stock EB but left some space behind the upper face for a thicker radiator!

"designed it on a stock EB but left some space" enuf space? Will you guarantee it will fit? If so..

Do you have any other way to buy it. I don't have paypal nor do I want to get it. Why no direct Credit card purchase like MAP, FFtec, MMR, ad infinitum..?

 

[dragonacc]

"designed it on a stock EB but left some space" enuf space? Will you guarantee it will fit? If so..

Do you have any other way to buy it. I don't have paypal nor do I want to get it. Why no direct Credit card purchase like MAP, FFtec, MMR, ad infinitum..?

The MMR core is real thick and it fits fine on the PP. My FFTEC IC is 3" thick and fits fine.

 

[BigCatDan]

The MMR core is real thick and it fits fine on the PP. My FFTEC IC is 3" thick and fits fine.

More concerned is more about the L shaped design of ATM's. It's not only the thickness.
I haven't seen it installed so I don't even know if it is adjustable. My impression is that it is set in a certain spot and that there is a certain amount of space behind the top part. Why is why I want to clarify. Beside if ATM can't guarantee it will fit the eco PP, it would put up a red flag for me.

 

[JerseyDevil]

More concerned is more about the L shaped design of ATM's. It's not only the thickness.
I haven't seen it installed so I don't even know if it is adjustable. My impression is that it is set in a certain spot and that there is a certain amount of space behind the top part. Why is why I want to clarify. Beside if ATM can't guarantee it will fit the eco PP, it would put up a red flag for me.

The mounting hole can be easily slotted to allow more forward adjustment if needed but I doubt that will be necessary as there is about a 1/4" of space behind the upper core as it is. We would do a full refund and pay for including shipping back to us if there was a fitment issue.

If anyone can put up size differences between the 2 radiators that would be great.

 

[dragonacc]

These are from Mishimoto's Radiator development thread - credit to those guys.

 

[JerseyDevil]

These are from Mishimoto's Radiator development thread - credit to those guys.

Thanks for the diagram BUT it just came to me that the condenser is in front of the radiator with a good gap between the two, so there should be no affect on fitment.

 

[dragonacc]

Thanks for the diagram BUT it just came to me that the condenser is in front of the radiator with a good gap between the two, so there should be no affect on fitment.

Ah, very good point. lol Totally slipped my mind.

 

[BigCatDan]

The mounting hole can be easily slotted to allow more forward adjustment if needed but I doubt that will be necessary as there is about a 1/4" of space behind the upper core as it is. We would do a full refund and pay for including shipping back to us if there was a fitment issue.

If anyone can put up size differences between the 2 radiators that would be great.

Thanks. Appreciate it! Now how do I buy it? No other option save PayPal?

 

[dragonacc]

Thanks. Appreciate it! Now how do I buy it? No other option save PayPal?

You can pay for things with Paypal without having a Paypal account. I think they might have to send you an actual invoice through Paypal, not sure. You just do a guest payment. I'd actually trust that more than some of the weak credit card payment services I've seen before.

 

[BigCatDan]

You can pay for things with Paypal without having a Paypal account. I think they might have to send you an actual invoice through Paypal, not sure. You just do a guest payment. I'd actually trust that more than some of the weak credit card payment services I've seen before.

Ok Ill Check it out. Thanks dragon!

 

[JerseyDevil]

Ok Ill Check it out. Thanks dragon!

Give the PayPal guest checkout a try. we prefer PayPal for several reasons:
1) it provides protection to both the buyer and seller
2) we have a printout that we file for each transaction
3) at the end of the year I only have to hand the accountant 1 piece of paper

Sponsored