ydoucare
Active Member
I did read about about putting foil or or metal under the antenna. I might try that after playing in ForScan. Is the below code the one you changed for transmission type?There were some posts about needing to create a larger metal "Antenna Plane" (I believe it's called...I'm not an RF Engineer) since the dash is made of plastic. I made one out of galvanized sheet metal from home depot. I did it to fix a backwards compass, but, my issue turned out to be the transmission type was wrong in ForScan. Nevertheless, maybe setting the GPS antenna on a larger piece of metal would help.
7D0-01-02 xx?x xxxx xxxx ? Should be: 8-Automatic Transmission Vehicles, 9-Manual Transmission Vehicles
Sponsored