StangTime
Well-Known Member
- Joined
- Apr 16, 2019
- Threads
- 77
- Messages
- 3,515
- Reaction score
- 3,938
- Location
- Ontario 🇨🇦
- First Name
- Todd
- Vehicle(s)
- 19' GT PP1 Manual
Hey @baevid I had some time last night to investigate. I placed my floor jack under the passenger side lower control arm and started lifting. The resulting noise transmitted through the body was hideous. Lowered and raised it a couple times and the noise persisted. So I removed the BMR brace (I left the bushing lockouts in place) and put the stock one back on. Lowered it and raised it a few times. No more creaking! Hmmm... Didn't have time to road test. Loading the suspension by lifting the control arm is quiet now. Hopefully it stays like that.Ah dang. Thanks @StangTime.
Keep me posted. I may end up doing the same because I've replaced and/or re-greased nearly part beside this piece, took off all my interior panels and lined them with jute... but this persistent squeak/creak always comes back some how only in the rear passenger side.
Sponsored