Help asap

[Table Lamp]

How do you get these taps off

Sponsored

 

[Snakebyte]

Isn't that a hex nut with two of the sides missing? If so, I'd try a hex wrench or socket that fits. And if a metric doesn't fit, try SAE sizes.

 

[thunderstrike]

Use a (long nose) Retaining Ring Plier.

 

[Torched10]

Try a small monkey wrench here's a link


https://www.harborfreight.com/10-in...6afPUekfVo6FwWginrx-g8Xb3NkhumkQaAlufEALw_wcB

 

[Pistol_91]

Twist it

 

[Cobra Jet]

Twist it

Yep it should unscrew.

 

[cerbomark]

twist and pull. Those 4 tabs that sit on the nut just ride the threads. you could even get a pick and pull a tab up if you have to.

 

[Nightmonkey]

No pull, just twist it like a regular nut.

 

[MiamiGT350]

twist, unscrew, rotate, spin, pivot, turn, unwind, go <-- that direction....

 

[SheepDog]

with a socket

 

[17MagMetal]

Angle grinder

 

[Goterr0r]

lefty loosy righty tighty...

 

[Pistol_91]

Hit it with a hammer

 

[JetGray_Mach1]

Twist and pull. If you just twist you may twist forever.

 

[LOL WUT]

Gonna need lots of heat. Get a torch.

Sponsored