Exhaust Tip question regarding all S550 Model Years

[Jerry Carguy]

I am working on a DIY for my 2021 GT that came with raw edged tips from the factory. They look totally incomplete without at least polished rolled tips. I am wondering if any of the other year vehicles came with a more attractive exhaust tip. Appreciate your response, thanks.

Sponsored

 

[mrgooden]

I agree they are not very attractive. Should have been a double wall tip at minimum.

Richard

 

[SEAICE]

Nope, the quad tips, started in 2018 are almost invisible. Two things I had to change right away... The Exhaust tips and stock GT wheels:

 

[Jerry Carguy]

Beautiful!

 

[monte87]

They are actually dangerous and can slice your hands when cleaning. Be careful..

 

[sabtaj1]

https://www.mustang6g.com/forums/threads/2018-2019-active-exhaust-tips.127455/page-5

And scroll.....

 

[joe603]

I love the M1 tips...but they are special and have some kind of baffles inside.

 

[Strokerswild]

IIRC, the OEM tips for the '15-'17s are rolled stainless.

Been a while since I've seen mine, them and the mufflers they're attached to have been in the attic since putting on my Borla axle back.

 

[WildHorse]

IIRC, the OEM tips for the '15-'17s are rolled stainless.

Correct.. well at least my base 17 does.

 

[Jerry Carguy]

Yeah, that is what I have learned. Mind boggling that Ford went ass backwards on this. I would bet it wasn't an engineering decision, probably some moron in the purchasing department looking for cost savings.

I have a simple solution in the works, should be ready soon.

 

[David Schmidt]

They are actually dangerous and can slice your hands when cleaning. Be careful..

Don't I know it... every time I put the cover on, a new cut on my hands. Imma sand those puppies down one of these days if I ever remember. Seems they got the sawzall out and lopped off the tube, job done.

 

[monte87]

Don't I know it... every time I put the cover on, a new cut on my hands. Imma sand those puppies down one of these days if I ever remember. Seems they got the sawzall out and lopped off the tube, job done.

Yuppppppppp me too!!! Them slices hurt, I got a really deep one. Really bad design

 

[Jaymar]

Yeah, that is what I have learned. Mind boggling that Ford went ass backwards on this. I would bet it wasn't an engineering decision, probably some moron in the purchasing department looking for cost savings.

I have a simple solution in the works, should be ready soon.

The 15-17 wasn't a whole lot better, they sucked too just not as bad. But they cut that, then the second horn, glove box light...etc.

 

[Rapid Red]

They are actually dangerous and can slice your hands when cleaning. Be careful..

Dangerous? LMAO

 

[Jaymar]

Dangerous? LMAO

Well, it looked at me sternly.

Sponsored