Zombo
befejezett
150 +/-15 lb-ft or 200 +/-20 NMWhat torque do you guys tighten the lugs?
It's in the GT350 suppliment
Sponsored
150 +/-15 lb-ft or 200 +/-20 NMWhat torque do you guys tighten the lugs?
150 ft-lbs.What torque do you guys tighten the lugs?
The stock lugs are terrible I shoot for 125 unless im on the track. Im not using the stock ones, one of which is stuck in my socket still.Zombo nailed it. That said, I hit the low side of the spec, or ~135lb-ft.
I agree with Epiphany as to the lower side of the +/-, especially if you wish to use the wheel locks, of which I seriously advise against use of the stock lock nuts.150 +/-15 lb-ft or 200 +/-20 NM
It's in the GT350 suppliment
Sorry... To clarify, I'm using the black Gorilla lugnuts, not the stock ones. Carry on... :cheers:I agree with Epiphany as to the lower side of the +/-, especially if you wish to use the wheel locks, of which I seriously advise against use of the stock lock nuts.
Link on where to find them pls?Sorry... To clarify, I'm using the black Gorilla lugnuts, not the stock ones. Carry on... :cheers:
Hi Andre,Link on where to find them pls?
150...I know it sounds excessive but that's spec. My digital guage goes to 147.5 so that where I'm at +/-.What torque do you guys tighten the lugs?