What did you do to your S550 Mustang today?!

[Modulom4]

Installed FP clear tails and changed the gt panel for the tri-bar pony

people will think you have an Ecoboost!! Fancy!

Sponsored

 

[HoosierDaddy]

Installed FP clear tails and changed the gt panel for the tri-bar pony

I REALLY want a Pony Package trunk emblem for my GT. Best looking emblem by far. Can't find an emblem anywhere and even if I wanted to spend $5xx for the whole panel, I would yank it off and put it on my existing smooth panel. Someday, a part number for the emblem will leak or I'll come across a damaged panel with untouched emblem.

 

[mrgooden]

Not a good picture as car is dirty and still on jack stands from winter mods.

Got some big bucks on the back end. Looking good!

Richard

 

[DonnieO]

I REALLY want a Pony Package trunk emblem for my GT. Best looking emblem by far. Can't find an emblem anywhere and even if I wanted to spend $5xx for the whole panel, I would yank it off and put it on my existing smooth panel. Someday, a part number for the emblem will leak or I'll come across a damaged panel with untouched emblem.

Try the parts farm or midway mustang if you haven't checked them out already

 

[HoosierDaddy]

Try the parts farm or midway mustang if you haven't checked them out already

Thanks.

On it .............

None now. Will watch. Based on current items, don't see any removed trunk emblems and every full panel (no Pony Pkg) is "servicable" so a lot of money for something I'd be throwing out or trying to sell without any emblem.

 

[Moonhowl]

Put this bad boy on...

How did you attach it to the honeycomb? My Bullitt style grille doesn’t have the pony shaped mounting surface and I was thinking of using superglue to attach mine.

 

[JRV1631]

Installed these. This is the unlock sequence. It also goes through the same sequence when you open an unlocked door. Accidentally posted these to the GT350 WDYD forum. So far very happy. And the DRL’s are the bright white. The turn signals are sequential like the rear.

 

[BigR4444]

How did you attach it to the honeycomb? My Bullitt style grille doesn’t have the pony shaped mounting surface and I was thinking of using superglue to attach mine.

Superglue would probably work.

It was done by Hydrodun.com and they send it to you with 3M adhesive on the back. So you can just peel and stick, and its stayed there since I put it on. I Believe I used an adhesion promoter prep pad as well... They really help

 

[TonyNJ]

Installed the Craig's license plate bracket. It's a quality product. Thanks @Bobn57, @tomservo92, @Mach VII for your inputs. Turns out it's the same kit for all the GT, Mach and EcoBoost cars, even though they ask you to choose. The GT350 mounting bracket is different however.

 

[Ceayay]

It was over the past few weeks not necessarily today but, installed my beefcake special procharger kit, tuned by lund. Now we'll see how long the mt82 holds out before i have to go T56

 

[Bikeman315]

Installed the Craig's license plate bracket. It's a quality product. Thanks @Bobn57, @tomservo92, @Mach VII for your inputs. Turns out it's the same kit for all the GT, Mach and EcoBoost cars, even though they ask you to choose. The GT350 mounting bracket is different however.

Looking good. Now take it off and put it behind the passenger seat. If you‘re ever asked about just say oops, I forgot to put it back on after (whatever excuse you can come up with).

 

[NightmareMoon]

I pulled the oil neck off since I'm no longer running the cover. Much better
What have you guys done with the stud for the engine cover? Does it come out easily?
You can see it there at the top of the picture. I wouldn't mind not seeing that

those are coarse threaded screws into the plastic, they’re not moulded in or anything.

To remove them you’d double nut the protruding threads and then unscrew. Shouldn’t be much of a problem. It might take a bit of force to get it started but you’ll be fine.

 

[NightmareMoon]

Today I had the local shop do a Roushectomy and Corsa transplant.

 

[Justpassingas]

Packed up for another road trip…drove 500 miles today to Gettysburg PA for a couple days

 

[EmCel]

I'm sic'ing @EmCel on you WD! Girl post up those pink calipers with glitter (powdered aluminum) that adorn your pretty blue car.

Ok so I sanded down my terrible painting skills on my calipers and fixed it with that and clear coat on it. Also splashed some glitter on my pinks today. Thanks to @shogun32 for letting me work there today.

Sponsored