Is that the Bullitt Front Brake kit? Just picked that up also for a 17 GT - hope it clears the 19 Project 6GRs….Placed an order…
Let me know what luck you have with the lines. Bought the same kit and tried passenger front first. Threads in caliper fine but could not get it to start chassis side. Fluid dripping everywhere so I gave up. Stock lines are fine for now.Placed an order…
Yup, that’s Bullitt. I have the Project 6GR Sevens 19/10 and have been assured they clear the Brembo kit. The wheels I picked clearing the brakes and allowing the car to be lowered and not have to run spacers is part of why I picked them.Is that the Bullitt Front Brake kit? Just picked that up also for a 17 GT - hope it clears the 19 Project 6GRs….
Absolutely will check, thanks for the heads up. I hope the lines work, let’s see!Let me know what luck you have with the lines. Bought the same kit and tried passenger front first. Threads in caliper fine but could not get it to start chassis side. Fluid dripping everywhere so I gave up. Stock lines are fine for now.
Oh and inspect rotors right away. Mine were beatin to death from Ford (not a Steeda issue).
I pulled the oil neck off since I'm no longer running the cover. Much betterToday I installed the Ford Performance Bullitt style fuel rail covers along with the Bemaro decals in white. Kind of expensive for something that's partially blocked by the strut brace, but that's ok. This engine needs all the help it can get
Copy on the Project 6GR sevens, that’s what I have on also - staggered.Yup, that’s Bullitt. I have the Project 6GR Sevens 19/10 and have been assured they clear the Brembo kit. The wheels I picked clearing the brakes and allowing the car to be lowered and not have to run spacers is part of why I picked them.
The black accent 19x8.5 fit the Brembos, I can’t imagine a world where these don’t. The offeset is what really determines if they fit…Copy on the Project 6GR sevens, that’s what I have on also - staggered.
Strap wrench?Oil change and tidy up the engine bay. I drove it this past winter.
My rant, I wish the filter manufacturers would standardize the diameter. I have two filter cup wrenches that "almost" fit the filter. Just how many do I need? And the V6 filter is in a tight spot.