What did you do to your S550 Mustang today?!

[mrgooden]

Installed Anderson Composites Type OE GT350/GT500 Style carbon fiber spolier. Spoiler included 4 stainless steel nuts, flat washers and lock washers instead of OEM style nyloc nuts. Was concerned about droping the Anderson Composites fastners into the trunk lid cavity so I used wheel bearing grease to hold the flat and lock washers on the studs while installing the nuts. Worked well!

Did you have a spolier before? No new holes to drill? I want to buy that but unsure if I need to drill.

Richard

Sponsored

 

[Doolin64]

Added Cal Pony NXT Splash Shields

 

[The Demon]

Ordered a "Do not flash" cover and CAI kit last week. Well, it all came in minus the CAI kit. Gotta wait a few weeks, on back order.

Richard

What brand is that? The Steeda looks the same but says 06-18. You have '19. Is it the same one?

 

[mrgooden]

What brand is that? The Steeda looks the same but says 06-18. You have '19. Is it the same one?

It is the Steeda, didn't read the 18 part, but OBD2 Ports are all the same. I'll have to try it tonight.

Richard

 

[ay1820]

Drove it!

Got rained on for all of 10 minutes (parked near a tree)

Hit it with CG V07 quick detailer

 

[mrgooden]

What brand is that? The Steeda looks the same but says 06-18. You have '19. Is it the same one?

I guess I'll read next time, certainly does not fit it does say 96-22

Richard

 

[Duece McCracken]

Washed all the darn pollen off it.

So it looked great for like 5 min. Smh...

 

[djpayne2]

Emptied the can and checked the oil.
Car has 3200. Can was in for 3000. Still on the original oil.

 

[Project]

Installed FP clear tails and changed the gt panel for the tri-bar pony

 

[EgoBoost]

I used wheel bearing grease to hold the flat and lock washers on the studs while installing the nuts. Worked well!

Nice. I installed mine with the trunk 3/4 closed so they would fall back down to me. Anyway I added the cheap AM GT350 version last night. Love it!

 

[Scott]

Did you have a spolier before? No new holes to drill? I want to buy that but unsure if I need to drill.

Richard

Took off a PP1 spoiler, no holes to drill everything lined up.

 

[mrgooden]

Took off a PP1 spoiler, no holes to drill everything lined up.

Great ty for the information

Richard

 

[The Demon]

Installed Anderson Composites Type OE GT350/GT500 Style carbon fiber spolier. Spoiler included 4 stainless steel nuts, flat washers and lock washers instead of OEM style nyloc nuts. Was concerned about droping the Anderson Composites fastners into the trunk lid cavity so I used wheel bearing grease to hold the flat and lock washers on the studs while installing the nuts. Worked well!

Very nice! Do you have a shot from behind?

 

[Scott]

Very nice! Do you have a shot from behind?

Not a good picture as car is dirty and still on jack stands from winter mods.

 

[DeepakGTCS]

BMR SP080r springs installed with 25mm spacers. Friday is alignment day! Like the look and feel!

Sponsored