What did you do to your S550 Mustang today?!

[BabyDoc1012]

Took the kids to school and tan to the store

Sponsored

 

[raptor17GT]

Mine is much the same system but made by Advanced Ice. Reverts to on again when going from forward/reverse and forward again. Turns off once over 20kph and on engine shutdown. I mounted mine in the lower grill where it seems to be best positioned for the likely impact points.

that'd be a great spot for an action camera which could in theory work as a parking camera too (need a screen inside of course)

 

[WD Pro]

that'd be a great spot for an action camera which could in theory work as a parking camera too (need a screen inside of course)

I’m currently about 50% through getting my train of thought on that idea out of my head and onto cad for cutting from stainless (removable number plate mount with incorporated GoPro mount)

The thing that’s slowing me down is my want for the PP2 splitter and that moves the goalposts / alters my design a little …

WD

 

[BlackstangGT]

Steeda Jack rails, drop in K&N air filter, Hurst auto shift handle with manual boot and some carbon fiber interior updates. Next up in the queue is Ford performance strut tower brace and bar and 25mm wheel spacers.

 

[mrgooden]

Steeda Jack rails, drop in K&N air filter, Hurst auto shift handle with manual boot and some carbon fiber interior updates. Next up in the queue is Ford performance strut tower brace and bar and 25mm wheel spacers.

I'd be interested in seeing your CF updates.

Richard

 

[ice445]

My BMR jacking rails came in. I didn't even know they made this "shorter tube" version, but it's all I was looking for since I just want somewhere to jack that's not on the pinch weld. I don't plan on putting all 4 jack stands on the rail, lol. They're also pretty light since it's just square tubing basically. And cheap, only $89. They're basically the same length as the Steeda low profile. I'm kinda disappointed with Steeda for the price doubling though, I remember when the low profile ones were like $100 or even less. Now they're almost $200? I get that steel prices have gone up, but come on now, lol.

 

[Bit_the_Bullitt]

My BMR jacking rails came in. I didn't even know they made this "shorter tube" version, but it's all I was looking for since I just want somewhere to jack that's not on the pinch weld. I don't plan on putting all 4 jack stands on the rail, lol. They're also pretty light since it's just square tubing basically. And cheap, only $89. They're basically the same length as the Steeda low profile. I'm kinda disappointed with Steeda for the price doubling though, I remember when the low profile ones were like $100 or even less. Now they're almost $200? I get that steel prices have gone up, but come on now, lol.

Just a word to the wise, if they are like the Steeda rails (that I have), notice they ARE different in length and you will save time of undoing the bolts realizing why bolt holes don't align on one side if you compare lengths and sides.

Ask me how I know.

 

[m3incorp]

You want to tell him if the longer ones go on drivers side or passenger side?

Just a word to the wise, if they are like the Steeda rails (that I have), notice they ARE different in length and you will save time of undoing the bolts realizing why bolt holes don't align on one side if you compare lengths and sides.

Ask me how I know.

 

[raptor17GT]

I’m currently about 50% through getting my train of thought on that idea out of my head and onto cad for cutting from stainless (removable number plate mount with incorporated GoPro mount)

The thing that’s slowing me down is my want for the PP2 splitter and that moves the goalposts / alters my design a little …

WD

oh i wouldn't hang a gopro off the front of the car. Way too expensive an item to shove out there to get hit by everything thrown up from the road. Was thinking a drone type POV camera..

 

[WD Pro]

oh i wouldn't hang a gopro off the front of the car. Way too expensive an item to shove out there to get hit by everything thrown up from the road. Was thinking a drone type POV camera..

With no tailgating I think it would be OK.

The cases are tough and to some extent, sacrificial. I would use the sealed box rather than the skeleton case (sound is crap anyway) and mine are old (2 x Hero 2's), not that I'm looking for an excuse to replace them ... lol

For my use it wouldn't be an everyday position anyway - just a novelty / special event kind of thing

WD

 

[Bit_the_Bullitt]

You want to tell him if the longer ones go on drivers side or passenger side?

Hey, I clearly implied I wasn't using my brain then, what makes you think I'm gonna use it now? Kidding. I don't remember. Something makes me think the passenger side was longer, but I would hold it up and feel for the holes instead of fastening front and not getting back to align.

With no tailgating I think it would be OK.

The cases are tough and to some extent, sacrificial. I would use the sealed box rather than the skeleton case (sound is crap anyway) and mine are old (2 x Hero 2's), not that I'm looking for an excuse to replace them ... lol

For my use it wouldn't be an everyday position anyway - just a novelty / special event kind of thing

WD

Thems gotta be some serious suction cups eh?
Although I know savagegeese, when they go to Autobahn in Chicago, put up legit Nikon (or whatever brand they got) cameras, like the big bulky things and it doesn't move, so I'm guessing the authorities on video/pics probably got the mounts figured out.

 

[Interceptor]

Never know when you might come across a flying cat.

 

[victory-rc]

Photo for the home...

 

[Gnatsum21]

Finally painted calipers.

 

[MCS]

The ones I bought have smoked lens, and are about the same brightness as the bulb was.
I have a grey car, lots of black accents - so smoked were my goto.

You have pics of these? I'm looking for a smoked/black lens taillight assembly myself!

Sponsored