What did you do to your S550 Mustang today?!

[nustang]

Most glued on emblems can be safely taken off with flossing string. A bit of goo gone will remove the left over glue residue.

or fishing line if you need something tougher than floss.
WD40 works Ok as well, but trick is to apply and wait 10 min.

Sponsored

 

[m3incorp]

I had my wheels repaired from the damage that occurred last week.

 

[BabyDoc1012]

I think I'd leave it there as a feature and call it RattleSnake

He slammed the lid so the nut got closer to the hole, then lifted the decklid slightly, stuck in endoscope camera and spent the rest of the day fishing it - with fishing hook attached to a cable. He said it didn't work for him, so he made a small ball out of a duct tape, attached it to the end of the cable and pushed it against the nut so it sticked, then lowered the decklid and pulled it out. He said that next time, he just drops a drop of superglue to the end of the table, waits untill it sticks and pulls it out ;)

I dropped a screw putting my shifter on yesterday. Duct tape on a long Philips head screwdriver and I got it out.

 

[RSPEK 178]

Mine is much the same system but made by Advanced Ice. Reverts to on again when going from forward/reverse and forward again. Turns off once over 20kph and on engine shutdown. I mounted mine in the lower grill where it seems to be best positioned for the likely impact points.

nice, I have sto and show number plate which is fitted from under skirt so wanted to see past back of number plate if mounted too low?

 

[19VelocityBlueGt]

Installed Bmr Differential lockout bushings And Gt350 halfshafts. The bushings were just sitting in a box, why not? Definitely adds noticeable nvh. Definitely added gear wine at hwy speeds. But car does feel better/solid/predictable/launches better-Better traction even.... Just hoping these bolts don’t break. The benefits out-weight the negative!! Yes does add nvh, but it’s minimal with my mbrp Race catback.. I actually like it!! #BecauseRacecar

 

[94gt]

Keeping with my Coyote theme, I swapped my 5.0 badges.

 

[sabtaj1]

Decided to go with white for the calipers. I used the G2 kit. Used a good 2" brush being that the brush they supply is meant for watercoloring kindergarten pictures. Seems like a quality paint though. Inspired by a very well known member from Miami, Mr. @Salty. Thanks for posting those pics, pal. I also went with the Ford Performance decal because the red in the lettering matches the 5.0 dot. I'll post some better pics when its not raining and I can get the car out of the garage.

Question: How many miles should one expect to get out of these factory goodyears (normal driving)? Any input is appreciated.

nice work!!!!! hope ya got that piece of tape on that front rotor.

 

[mrgooden]

More Bling!

Real CF? I tried finding one on Carbon core and Trufiber but could not.

Richard

 

[FLfree]

Real CF? I tried finding one on Carbon core and Trufiber but could not.

Richard

eBay

 

[MIDLYFE]

nice work!!!!! hope ya got that piece of tape on that front rotor.

Haha! I was wondering who'd be the first member to spot that. I almost edited the post by taking that one photo out but then I figured where's the fun in that. The task of tape removal took place after happy hour began so.....

Posts like yours are why I love this forum. Cheers for winning this weeks contest of Where's Waldo!

 

[Bit_the_Bullitt]

There are several options out there. The one I fitted interfaces with the LCD screen and is activated by a touch of the return button on the steering wheel for about 6 secs and stays on until you turn it off or put car in reverse. It’s made by ASL and cost about $900 bills AUD. I’ll take a few photos and post so you can see install. You can choose where you put camera and which camera you use. I opted for a small unit, would have liked to get camera fitted in the honeycomb of the grill but I did not end up with that. You’ll see from photos when I post them.
Cheers Mark

Mine is much the same system but made by Advanced Ice. Reverts to on again when going from forward/reverse and forward again. Turns off once over 20kph and on engine shutdown. I mounted mine in the lower grill where it seems to be best positioned for the likely impact points.

Okay so they are actual cameras, good to know.
Can you both post some more pics, or send them via message to me? I would like better close up. I see it down below the plate, but what's that little "knob" next to the pony? A deer-deterrent?

Also, what's the resolution like? Good enough to see obstacles I guess? The site I found has a pic and it looks slightly "meh," but beggars can't be choosers!
I am assuming this be the kit:
https://www.aslautomedia.com.au/mustang-fm-sync-front-camera-interface

 

[compprep]

Here's two front cameras.

https://brandmotion.com/product/cur...or-8-display-ford-mustang-2015-2020-5000-ca9/

https://www.ebay.com/itm/1850086089...lid=20006&customid=4581664967841094_377870104

 

[dx2]

UPS arrived and brought something nice.

 

[Nodster]

She’s gorgeous. I love it. I think the spoiler will look great. Please post pics.

Love deep blue on those option wheels. All it needs is the red interior.

Thank you both! I will post some pics for sure.

 

[Tib]

Unboxed more goodies I need to get time to install...Steeda delivered.

Sponsored