Sponsored

Centri Boys, Need Your Wisdom!

Torinate

Well-Known Member
Joined
Feb 18, 2018
Threads
88
Messages
2,038
Reaction score
943
Location
Ontario
Vehicle(s)
2016 GT Convertible
I ran many centri's for 22 years. I will never go back. 90% street driving fun = PD. Period.
Absolutely and completely agree with this statement. I too have had the gamut of different power adders since the start of the fox bodied mustangs in ‘87 with an old ball drive Paxton. For the street, to me anyways, nothing compares to a PD blower.
Your mileage may vary...
Sponsored

 

LSchicago

Well-Known Member
Joined
May 11, 2018
Threads
93
Messages
2,914
Reaction score
2,544
Location
Illinois
First Name
Lloyd
Vehicle(s)
2018 Mustang GT/A 301A 5.0
Absolutely and completely agree with this statement. I too have had the gamut of different power adders since the start of the fox bodied mustangs in ‘87 with an old ball drive Paxton. For the street, to me anyways, nothing compares to a PD blower.
Your mileage may vary...
A good Centri setup with a 10R80 is a match made in heaven though!
 

Marketplaza

Well-Known Member
Joined
May 18, 2020
Threads
15
Messages
327
Reaction score
111
Location
Ks
First Name
Mike
Vehicle(s)
2019 GT shadow black and 18 dodge caravan
I have a 6 speed with 4.09 gears. I couldn’t go pd if I wanted unless I change my gear ratio, but a 4.09 with a centri is a match made in heaven.
 

WhinRR

Well-Known Member
Joined
Jun 17, 2019
Threads
9
Messages
123
Reaction score
45
Location
Ohio
First Name
Sean
Vehicle(s)
1988 Ford Mustang GT, 2018 Ford Mustang GT
We might be able to better guide you down the path knowing what your desired plans/application are. Are you racing? What are you racing?

For instance, Drag racing and Road Racing are two completely different types of car setups. Anybody who tells you they have a car that can do both in all actuality likely can't do one or either very well.

ED - PD Blower install is easier than a Centri install. Way easier. If you can unbolt your intake manifold, you can bolt a PD blower on, and from there it might be plugging in new injectors and flashing a tune.
But installing a Centri is essentially removing belts and bolting on if you simplify it that much.
 

PaddyPrix

Well-Known Member
Joined
Sep 29, 2019
Threads
13
Messages
669
Reaction score
857
Location
San Diego
Website
www.youtube.com
First Name
Patrick
Vehicle(s)
07 335is, 08 LR2, 13 Tahoe, 18 Mustang GT x2
Vehicle Showcase
2
But installing a Centri is essentially removing belts and bolting on if you simplify it that much.
Yeah, that's fair.
However, I'm a complete idiot, and with an occasional check to the manual for torque specs and whatnot, I was able to install a KB Mammoth in just a couple of hours. I couldn't say the same thing for a Novi 2000.
 

Sponsored

Marketplaza

Well-Known Member
Joined
May 18, 2020
Threads
15
Messages
327
Reaction score
111
Location
Ks
First Name
Mike
Vehicle(s)
2019 GT shadow black and 18 dodge caravan
I have a 6 speed with 4.09 gears. I couldn’t go pd if I wanted unless I change my gear ratio, but a 4.09 with a centri is a match made in heaven.
 

Torinate

Well-Known Member
Joined
Feb 18, 2018
Threads
88
Messages
2,038
Reaction score
943
Location
Ontario
Vehicle(s)
2016 GT Convertible
Yeah, that's fair.
However, I'm a complete idiot, and with an occasional check to the manual for torque specs and whatnot, I was able to install a KB Mammoth in just a couple of hours. I couldn't say the same thing for a Novi 2000.
No offense whatsoever, but installing a KB in a couple hours seems just a little far fetched. I’ve never installed a KB though. (Maybe there’s no belt stuff and brackets to worry about and the intake can stay where it is) I’m not sure what you do career wise, but if you are truly that quick, you should be installing these things professionally. Having installed a myriad of PDs and centris, each and every single time the centri was far quicker. Not even close actually.

Again, no disrespect in any way, but how long do the instructions say the install should take on the KB as well as the others?
 

schmeky

Well-Known Member
Joined
Apr 7, 2019
Threads
57
Messages
784
Reaction score
845
Location
West Monroe Louisiana
First Name
David
Vehicle(s)
2018 Mustang GT, 2024 Mustang GT
It can take nearly 2 hours just to change the plugs . . . . . . . . .
 

Burkey

Well-Known Member
Joined
Feb 9, 2016
Threads
87
Messages
5,524
Reaction score
3,512
Location
Australia
Vehicle(s)
2016 Mustang GT
Vehicle Showcase
1
I’d be very wary of a Centri on a car with an MT. The fact that you have one less gear to 1:1 than the earlier cars just makes it worse.

I wouldn’t be putting too much stock into the opinions of guys running e85 in their A10 centri cars on drag radials.
Your car isn’t the same, your goals probably aren’t the same either.
You probably aren’t even the same kind of driver, you opted for a clutch for one thing….

Manual car on the street = PD blower unless the owner has a very specific need for something else IMO.
 

LSchicago

Well-Known Member
Joined
May 11, 2018
Threads
93
Messages
2,914
Reaction score
2,544
Location
Illinois
First Name
Lloyd
Vehicle(s)
2018 Mustang GT/A 301A 5.0
I’d be very wary of a Centri on a car with an MT. The fact that you have one less gear to 1:1 than the earlier cars just makes it worse.

I wouldn’t be putting too much stock into the opinions of guys running e85 in their A10 centri cars on drag radials.
Your car isn’t the same, your goals probably aren’t the same either.
You probably aren’t even the same kind of driver, you opted for a clutch for one thing….

Manual car on the street = PD blower unless the owner has a very specific need for something else IMO.
I agree with this, and recommend a PD SC with a 2018 up MT82 every time.
 

Sponsored

dead_inside

Well-Known Member
Joined
Nov 22, 2019
Threads
14
Messages
474
Reaction score
1,285
Location
PNW
Vehicle(s)
16 GT Prem PP
I agree with this, and recommend a PD SC with a 2018 up MT82 every time.
What about a gen 2 mt82, specifically with the 3.73s? The closer gearing with the higher rear end change your mind at all? Just curious in hearing your opinion, I’m still stuck on the fence
 

Meatball

Well-Known Member
Joined
Apr 21, 2018
Threads
20
Messages
590
Reaction score
351
Location
CA
Vehicle(s)
17 GT
What about a gen 2 mt82, specifically with the 3.73s? The closer gearing with the higher rear end change your mind at all? Just curious in hearing your opinion, I’m still stuck on the fence
Consider also that you can install a pd and 3:31 pumpkin down the road. Consider that in your budget too.

I have zero experience with Centris but have a gen2 6m with G5S2 Whipple and it’s awesome
 

Marketplaza

Well-Known Member
Joined
May 18, 2020
Threads
15
Messages
327
Reaction score
111
Location
Ks
First Name
Mike
Vehicle(s)
2019 GT shadow black and 18 dodge caravan
I’d be very wary of a Centri on a car with an MT. The fact that you have one less gear to 1:1 than the earlier cars just makes it worse.

I wouldn’t be putting too much stock into the opinions of guys running e85 in their A10 centri cars on drag radials.
Your car isn’t the same, your goals probably aren’t the same either.
You probably aren’t even the same kind of driver, you opted for a clutch for one thing….


What do you do if your me then? I have 4.09 gears and have plenty of low end because of it. I have a manual but I went with a Paxton. I could have got a whipple and waited 20 weeks for it to come in and then pay another 1k to swap my gears back to 3.55. I personally think a centri is my only option.
Manual car on the street = PD blower unless the owner has a very specific need for something else IMO.
 

Marketplaza

Well-Known Member
Joined
May 18, 2020
Threads
15
Messages
327
Reaction score
111
Location
Ks
First Name
Mike
Vehicle(s)
2019 GT shadow black and 18 dodge caravan
What do you do if your me then? I have 4.09 gears and have plenty of low end because of it. I have a manual but I went with a Paxton. I could have got a whipple and waited 20 weeks for it to come in and then pay another 1k to swap my gears back to 3.55. I personally think a centri is my only option.
 

Burkey

Well-Known Member
Joined
Feb 9, 2016
Threads
87
Messages
5,524
Reaction score
3,512
Location
Australia
Vehicle(s)
2016 Mustang GT
Vehicle Showcase
1
What do you do if your me then? I have 4.09 gears and have plenty of low end because of it. I have a manual but I went with a Paxton. I could have got a whipple and waited 20 weeks for it to come in and then pay another 1k to swap my gears back to 3.55. I personally think a centri is my only option.
Well….you don’t have “better low end”. You have a car that needs to shift up gears sooner (Relative to road speed).
So, when you shift into second, the guy next to you is still in first etc.
I‘m quite sure the car feels subjectively faster though because each gear produces more torque (approx 14%j at the rear tyre than it did with the 3.55’s
Why would you “need“ to swap back to 3.55’s with a PD? On the strip I get it, but for road use it would just be hilarious. 4th gear might even get sketchy on the right (wrong?) tyre.
Sponsored

 
 








Top