zackmd1
Well-Known Member
- Thread starter
- #1
This is the start of my second S550 V6 project. For some that do not know, I went from a 2015 V6 with 110k miles up to a new 18 GT in May 2018. Unfortunately, in December, my 18 was totaled... My replacement is what you see below, a 2016 051A V6 Deep Impact Blue with 29k miles. Got the car for less than 17k in perfect condition which effectively halves the cost of the car comparted to the GT. My ambitious plan for this car is to make the Mustang Ford would not, a Premium Ecoboost V6. I also plan on some body mods like an 2018 rear bumper and possibly 2018 style front clip (with non-stock bumper) since I already have a few 18 parts. The project is just starting so the mod list is not fully together but will be coming soon!
Performance
-Custom high flow cat quad tip (Planned 2019)
-Custom CAI (Installed 1/2019 )
-GT Throttle body adapter (Installed 1/2019)
-MPT performance tune (Flashed 1/2019)
-2014 GT Throttle body (Installed 1/2019)
-MMR Lightweight Water Pump Pulley (Planned 2019)
-3.5 Ecoboost Turbos! (Planned mid 2019)
Suspension
-Eibach Pro Lowering Springs (Planned early 2019)
-BMR Cradle lockout (Planned 2019)
-Steeda Billet Shock Mounts (Planned 2019)
Exterior
-Ford Racing rear taillight panel with OneSmallFry's Cyclone GT350 like badge (Planned 2019)
-2018 Rear Bumper and Quad diffuser (Planned 2019)
-Pony projector mirror lights (early 2018)
-Larger foundry wheels 19x9.5 if available or GT CS Wheels (Planned 2017-2018)
-GT350 Track Pack Spoiler (Planned 2019)
-Trufiber A72 hood (Planned 2019-2020)
-Carbon Dynamics GT350 style fenders (Planned 2019-2020)
Interior
-Illuminated sill plates (Planned early 2019)
-Illuminated mycolor cup holder (Planned 2019)
-CJ Pony Parts all Leather Steering Wheel (Planned 2019)
-Sync 3 swap (Installed 12/2018)
-2018 Start Button (Installed 12/2018)
-Leather Interior (Planned 2019)
-Enabled Premium drive modes (programmed 2018)
-2018 Mustang Digital Gauge Cluster (Installed 12/2018)
Current Exhaust:
Performance
-Custom high flow cat quad tip (Planned 2019)
-Custom CAI (Installed 1/2019 )
-GT Throttle body adapter (Installed 1/2019)
-MPT performance tune (Flashed 1/2019)
-2014 GT Throttle body (Installed 1/2019)
-MMR Lightweight Water Pump Pulley (Planned 2019)
-3.5 Ecoboost Turbos! (Planned mid 2019)
Suspension
-Eibach Pro Lowering Springs (Planned early 2019)
-BMR Cradle lockout (Planned 2019)
-Steeda Billet Shock Mounts (Planned 2019)
Exterior
-Ford Racing rear taillight panel with OneSmallFry's Cyclone GT350 like badge (Planned 2019)
-2018 Rear Bumper and Quad diffuser (Planned 2019)
-Pony projector mirror lights (early 2018)
-Larger foundry wheels 19x9.5 if available or GT CS Wheels (Planned 2017-2018)
-GT350 Track Pack Spoiler (Planned 2019)
-Trufiber A72 hood (Planned 2019-2020)
-Carbon Dynamics GT350 style fenders (Planned 2019-2020)
Interior
-Illuminated sill plates (Planned early 2019)
-Illuminated mycolor cup holder (Planned 2019)
-CJ Pony Parts all Leather Steering Wheel (Planned 2019)
-Sync 3 swap (Installed 12/2018)
-2018 Start Button (Installed 12/2018)
-Leather Interior (Planned 2019)
-Enabled Premium drive modes (programmed 2018)
-2018 Mustang Digital Gauge Cluster (Installed 12/2018)
Current Exhaust:
Sponsored
Last edited: