Roush stage 1 numbers before upgrades

[beerformeplz]

Dropped off today for opg and sprocket along with 79mm pulley injectors and bap. Made 499 in 5th before hitting the speed limiter and 476 in 4th. Will post after numbers when done.

Sponsored

 

[Stage_3]

Who is tuning the car?

 

[beerformeplz]

Who is tuning the car?

Brent at DTP

 

[Dntalman]

If you are on Stage 1 kit you should have a 85mm. You are a little low on power. If you are running a 79mm. You are leaving a lot on the table.

 

[beerformeplz]

If you are on Stage 1 kit you should have a 85mm. You are a little low on power. If you are running a 79mm. You are leaving a lot on the table.

Numbers are before the 79

 

[Whipple SC]

Dropped off today for opg and sprocket along with 79mm pulley injectors and bap. Made 499 in 5th before hitting the speed limiter and 476 in 4th. Will post after numbers when done.

Run in 4th....

 

[beerformeplz]

Having issues unlocking the ecu to get it tuned. Had a guy that works for a local dealer come buy and said he couldn't do it either. Anyone else had this issue?

 

[Whipple SC]

Having issues unlocking the ecu to get it tuned. Had a guy that works for a local dealer come buy and said he couldn't do it either. Anyone else had this issue?

You need to put it back to stock with an IDS tool, the cal is encrypted and your tuner will not be getting any help there. He will have to start from scratch or use a pre-built tune from SCT which is a starting point, but by no means a completed cal.

FYI, call Lund or PBD to get a tune, save yourself the headache.

 

[zaquhree]

Sounds like hes trying to be lazy and piggy back off the Roush tune....as said go with Lund

 

[15RRGT]

Run in 4th....

Why 4th instead of 5th at one to one?

 

[daltron]

You need to put it back to stock with an IDS tool, the cal is encrypted and your tuner will not be getting any help there. He will have to start from scratch or use a pre-built tune from SCT which is a starting point, but by no means a completed cal.

FYI, call Lund or PBD to get a tune, save yourself the headache.

^ This.

Why 4th instead of 5th at one to one?

Because he is hitting the speed limiter.

 

[Stage_3]

Having issues unlocking the ecu to get it tuned. Had a guy that works for a local dealer come buy and said he couldn't do it either. Anyone else had this issue?

You need to put it back to stock with an IDS tool, the cal is encrypted and your tuner will not be getting any help there. He will have to start from scratch or use a pre-built tune from SCT which is a starting point, but by no means a completed cal.
FYI, call Lund or PBD to get a tune, save yourself the headache.

^^BINGO!!!
It's a Roush tune. It will be encrypted.

 

[doodguy]

Lund can overwrite the roush tune with the ngauge

 

[Doctor Fishtail]

Having issues unlocking the ecu to get it tuned. Had a guy that works for a local dealer come buy and said he couldn't do it either. Anyone else had this issue?

I had same problem. Ken Bjonnes fixed everything quickly and with ZERO issues. Again.....Call Ken.

 

[JasinEdward]

Lund tune flashes quick

Sponsored