Modifying As-Built Data Guide

[usmade75]

If anyone could help please . 2020 Mustang GT PP1 with digital cluster- Procharged...Got the boost gauge to come up in the cluster with FORSCAN, but it's only reading VAC stops on 0 and doesn't go into the boost side. Literally only moves in the highlighted side.

Sponsored

 

[CozyBuckets]

Does anyone know the values needed to add this to my digital cluster? I have a 2018 nonPP premium and want to add this gauge if possible to view the AFR the car is actually running at

 

[sp2k1]

Does anyone know the values needed to add this to my digital cluster? I have a 2018 nonPP premium and want to add this gauge if possible to view the AFR the car is actually running at

Did your car come with the digital cluster? On mine I just arrow up on the steering wheel controls when I have the three little guages displayed in the center and that screen pops up.

 

[WD Pro]

Did your car come with the digital cluster? On mine I just arrow up on the steering wheel controls when I have the three little guages displayed in the center and that screen pops up.

Correct - and the gauges to be displayed can be selected from the settings, AF ratio being one of them :

WD

 

[CozyBuckets]

Correct - and the gauges to be displayed can be selected from the settings, AF ratio being one of them :

WD

yup it did coke with the digital cluster! When I select my gauges all I get are these gauge pods no matter how I scroll unfortunately

 

[WD Pro]

You need to go into settings and select the gauges you want from the available list (maximum of three)

WD

 

[CozyBuckets]

You need to go into settings and select the gauges you want from the available list (maximum of three)

WD

those three are the ones that I’ve set as my gauges, they appear that way as a cluster instead of as actual numeric read outs

 

[dx2]

is it even possible that there might be an asbuilt setting preventing the display of the textual key value pairs ? The arrow-down button should work displaying them if the cluster is delivered from factory.

 

[sp2k1]

is it even possible that there might be an asbuilt setting preventing the display of the textual key value pairs ? The arrow-down button should work displaying them if the cluster is delivered from factory.

Yeah, on my 2019 I can just press arrow down on the steering wheel when those are displayed and I get the text read out. If I arrow down again it shows telemetry.

 

[Soulja4187]

Good afternoon, good evening or good night, as the case maybe, where you are.
I’m far from a FORScan expert but have had success with it in the past. In my 2016 SHO and 2018 Explorer Sport I’ve deleted the double horn honk, changed the half stock press to 4 flashes and activated simultaneous fogs and high beams. In the Explorer I added climate controls to the right hand screen. While it‘s always a little intimidating when you start doing it on a brand new vehicle I was confident that I was up to the task on my 2021 GT. The only spreadsheet I could find was for a 2020. I went into the steering control module through the “Configuration“ option and switched the flash count successfully, no problem.
However, the body control module was the only one without a “Configuration” option. No problem. I’ve gone this route as well before. Found the addresses for the fogs and honk. Made the changes and clicked the write button for each line. Progress bar indicated changes were being made, interior light flashed, cycled the ignition as directed and…..nothing. Neither change took. Returned them to stock values and searched the web. Nothing. Any ideas?

Nothing? Nobody? It’s July. Somebody has to have modified or attempted a 2021 body control module. If I‘m being dense, I’m good at that! And grateful at excepting corrections. I’m about ready to unplug the horns and carry a boat air horn!

Seems like we are in the same boat and the ones that have figure it out don't want to share their list.

 

[JRV1631]

Seems like we are in the same boat and the ones that have figure it out don't want to share their list.

So it would seem. I’ve given up on it for the moment. I thought maybe around thanksgiving I’d get a new license and see if anyone added the toggle options to the 2021 BCM. Good luck. If you find out anything, don’t forget your friends! And trust me, if I do, same here!!

 

[Vlad Soare]

I understand there's an option in FORScan that makes the parking sensors sound through the IPC instead of the speakers. I have a question for those of you who've done this change: does the music volume still get lower while the sensors are beeping?
I would like the parking sensors to beep over the music, while leaving the music completely unchanged, at the same volume. Will I achieve this if I route the beep through the IPC?

 

[WD Pro]

I have a 2020 RHD euro GT and I am hoping someone can help with codes related to the MyKey settings

I have the speed limit option :

But it only has one speed setting which is pretty much useless :

I want more options, like this guy who I pinched screenshots from one of his videos :

Is anyone aware of any FoScan codes that can help me to activate additional speed limit options ?

Thanks in advance for any responses

WD

 

[Mike Pfeifer]

The mykey thing would be more useful for me if it limited engine power instead of top speed. You can get in a lot of trouble way before you get to 20mph.

 

[TexasRebel]

I have a 2020 RHD euro GT and I am hoping someone can help with codes related to the MyKey settings

I have the speed limit option :

But it only has one speed setting which is pretty much useless :

I want more options, like this guy who I pinched screenshots from one of his videos :

Is anyone aware of any FoScan codes that can help me to activate additional speed limit options ?

Thanks in advance for any responses

WD

Might be a UK thing? You can likely change your build code to say it's a NA car, but there is probably other hardware that will go bonkers.

Sponsored