Modifying As-Built Data Guide

[Scott Wilson]

Does anyone know how to change the oil life from 10k down to 5k? Also IDK how I turned on Line Lock on my base but its on and its working. I just disabled and enabled a few things I wanted and that was not one of them. Weird

Sponsored

 

[Scott Wilson]

Also I dont have the OBDLink MX im using the LX(already bought a few years back) so I dont see all the tables everyone else sees

 

[SloSVO]

Does anyone know how to change the oil life from 10k down to 5k? Also IDK how I turned on Line Lock on my base but its on and its working. I just disabled and enabled a few things I wanted and that was not one of them. Weird

I have a base GT and linelock has always been there... used it leaving the dealer...

 

[Scott Wilson]

Do you have PP?

 

[Scott Wilson]

Shit I guess I always went into track apps while moving so it always was greyed out lmao hahahaha nevermind. I feel like an idiot.

 

[solodogg]

did a little more tinkering tonight to see what else I could find, didn't find much that's helpful to me, but maybe for some...

Enable HD Radio (requires APIM swap):
7D0-01-01 xxxx xxx2 xxxx (disabled)
7D0-01-01 xxxx xxx3 xxxx (enabled)

Enable iTunes Tagging (requires APIM swap):
7D0-01-01 xxxx xxxx 2xxx (disabled)
7D0-01-01 xxxx xxxx Axxx (enabled)

 

[X0AYHAM0X]

Anyone tried to enable MyColor on base models?

 

[Evil Minion]

Another thing I haven't seen mention of; does anyone know the code for changing the timer on the rear defrost??

The little 5 minutes or whatever it is, is way too short to even clear up the regular morning condensation, much less actual ice in the winter without having to turn it on 2-3 times back to back.

 

[solodogg]

did a little more tinkering tonight to see what else I could find, didn't find much that's helpful to me, but maybe for some...

Enable HD Radio (requires APIM swap):
7D0-01-01 xxxx xxx2 xxxx (disabled)
7D0-01-01 xxxx xxx3 xxxx (enabled)

Enable iTunes Tagging (requires APIM swap):
7D0-01-01 xxxx xxxx 2xxx (disabled)
7D0-01-01 xxxx xxxx Axxx (enabled)

So, looking around online, it would seem that the radio functions are actually contained in the ACM,and changing the above bits just enables the buttons in the ACIM.

So, playing with the ACM code didn't get me far. Motorcraftservice only lists 727-01-01 through 727-04-01, but the car shows information up to 727-08-06. I did change the ACM programming in mine to match a 201a car, but the HD radio button is still not functional.

Below are the values I used, and noticed no difference at all...

727-01-01 1850 FA00 44 - 200a
727-01-01 1050 FA00 44 - 201a

727-01-02 0288 - 200a
727-01-02 0388 - 201a

727-03-01 14 - 200a
727-03-01 28 - 201a


Anyone have any additional thoughts? I would think there would be a way to enable this with programming, but could be totally wrong since I don't know if the ACM modules have different part numbers or not.

 

[TexasRebel]

So, looking around online, it would seem that the radio functions are actually contained in the ACM,and changing the above bits just enables the buttons in the ACIM.

So, playing with the ACM code didn't get me far. Motorcraftservice only lists 727-01-01 through 727-04-01, but the car shows information up to 727-08-06. I did change the ACM programming in mine to match a 201a car, but the HD radio button is still not functional.

Below are the values I used, and noticed no difference at all...

727-01-01 1850 FA00 44 - 200a
727-01-01 1050 FA00 44 - 201a

727-01-02 0288 - 200a
727-01-02 0388 - 201a

727-03-01 14 - 200a
727-03-01 28 - 201a


Anyone have any additional thoughts? I would think there would be a way to enable this with programming, but could be totally wrong since I don't know if the ACM modules have different part numbers or not.

check fordparts.com with different VINs to find part numbers.

 

[tom_sprecher]

Can you adjust the rpm at which the tach goes red?

 

[ASarsano]

I would love to be able to change it so it changes to a diff color instead of red at reline. I have my gauges set to red normally so basically I lose this feature. would be cool the make it change to blue or some thing else at redline when the gauges are set to red

 

[TexasRebel]

I would love to be able to change it so it changes to a diff color instead of red at reline. I have my gauges set to red normally so basically I lose this feature. would be cool the make it change to blue or some thing else at redline when the gauges are set to red

Doesn't that make it more difficult to see brake lights and stop lights come on?

 

[solodogg]

check fordparts.com with different VINs to find part numbers.

good call...part number isn't listed since audio parts are sold through another interface with a request form, but the description does show a difference between HD and non-HD modules. So much for adding HD radio :doh:

Did find another website online that shows that everything from 727-05-01 is the am/fm/sirius presets though, so none of those programming differences would matter. I guess now it's time to come up with an OEM Shaker Pro subwoofer and wiring, and figure out how to enable that in the ACM.

 

[Burkey]

Guys, I haven't managed to get through all 68 pages of this thread sorry.
Simple question.
Is it possible to change the steering assistance?
I realise we can do it via the toggle, but what I'm talking about is making ALL of those settings heavier.
Anyone?

Sponsored