Muligan
ARRR!
- Joined
- Dec 16, 2016
- Threads
- 85
- Messages
- 1,255
- Reaction score
- 1,817
- Location
- North Central Illinois
- Vehicle(s)
- G0059 / Former Track Attack #14 "The Rented Mule"
- Thread starter
- #1
So, I did a really good job installing an R splitter on my car.... but now I can't get the "click tabs" to release so that I can remove it.
I've pulled all the screws and the four white 1/2 circle tabs (and accounted for all the hardware on the inventory list) and the only thing holding it on are the "click tabs" along the leading edge.
I can see the farthest outboard tab on each side, but none of the others.
Any tips or tricks to getting those to let go without ripping the whole front fascia off the car and/or breaking the slots?
I've pulled all the screws and the four white 1/2 circle tabs (and accounted for all the hardware on the inventory list) and the only thing holding it on are the "click tabs" along the leading edge.
I can see the farthest outboard tab on each side, but none of the others.
Any tips or tricks to getting those to let go without ripping the whole front fascia off the car and/or breaking the slots?
Sponsored