Hellion Sleeper Kit

[IceMan706]

How are you guys mounting your boost solenoids for the sleeper kit? I need a little inspiration for my setup.

Sponsored

 

[NGOT8R]

Please post pics and a write up of your TT setup build if you can. The more info. available on projects like these, the more helpful they can be to others looking to make that leap.

I’m about to begin work on mine soon and will do the same. Thanks

 

[Cordero1]

Please pics and a write up of your TT setup build if you can. The more info. available on projects like these, the more helpful they can be to others looking to make that leap.

I’m about to begin work on mine soon and will do the same. Thanks

Does you kit require you to replace the a/c line? Slimmer radiator & moving fuse box is part of it correct?

 

[NGOT8R]

Does you kit require you to replace the a/c line? Slimmer radiator & moving fuse box is part of it correct?

There’s no mention of replacing the AC lines on the 2018+, but I’ll have to evaluate the need to do so when I get to that step. I will keep the factory radiator (just move it forward with supplied brackets). The fuse panel can also stay in the factory location, but the PCM needs to be relocated. Here’s BL Fab’s PDF instructions.

 

[Zrussian13]

Are you running one or two solenoids? I run one on mine and have it mounted next to the battery under the cowl. There's a hole already there so it bolted up easy.

 

[Cordero1]

There’s no mention of replacing the AC lines on the 2018+, but I’ll have to evaluate the need to do so when I get to that step. I will keep the factory radiator (just move it forward with supplied brackets). The fuse panel can also stay in the factory location, but the PCM needs to be relocated. Here’s BL Fab’s PDF instructions.

I'd probably never go this route for many reasons & end up with a hellion or ess, but still looking forward to your build.

 

[Cordero1]

There’s no mention of replacing the AC lines on the 2018+, but I’ll have to evaluate the need to do so when I get to that step. I will keep the factory radiator (just move it forward with supplied brackets). The fuse panel can also stay in the factory location, but the PCM needs to be relocated. Here’s BL Fab’s PDF instructions.

Wow them are vague instructions & quiet a few things you have to discard.

 

[Virgilbg]

How much was this kit?

 

[NGOT8R]

Wow them are vague instructions & quiet a few things you have to discard.

Yes, they are. It’s going to be one heckuva challenge to do the install.

 

[NGOT8R]

How much was this kit?

The Hellion TT or BL Fab kit? I bought mine in stages, but they‘re now selling the entire kit for $7500 which is a $2K discount.

 

[Virgilbg]

The Hellion TT or BL Fab kit? I bought mine in stages, but they‘re now selling the entire kit for $7500 which is a $2K discount.

BL Fab

 

[Vandor]

How are you guys mounting your boost solenoids for the sleeper kit? I need a little inspiration for my setup.

I have a whole build log you can see under custom hellion turbo kit. I have detailed pics of the solenoids mounted but most people mount them in the upper rear of the front fender well behind the wheel bins.

 

[IceMan706]

would I have to drill my own holes behind the wheel well liner?

 

[Vandor]

would I have to drill my own holes behind the wheel well liner?

No there is holes already there for some reason and they tend to line up perfect with a ziptie.

 

[IceMan706]

Is there anyway you could show a picture of the location?

Sponsored