Sponsored

Cup holders and handbrake - RHD

slowhand99

Well-Known Member
Joined
May 3, 2015
Threads
61
Messages
3,141
Reaction score
944
Location
Surrey, England
First Name
Ben
Vehicle(s)
Mustang GT Vert Race Red ord 26/03/15 del 24/03/16
I messaged them earlier expressing complete dissatisfaction. I'd suggest others do as well.

How hard is it for them. Look at the Ranger, Mondeo etc - properly set up for LHD and RHD.
Most cars don't have a handbrake lever these days (e.g. Mondeo) so the hardest part of re-working the centre console goes away. But the Ranger is a good example of one that does, has been properly flipped for RHD/LHD, and gives me a little bit of hope for the production RHD Mustangs.
Sponsored

 

Bobsp12

Super Moderator
Moderator
Joined
Apr 10, 2015
Threads
22
Messages
1,198
Reaction score
1,282
Location
Adelaide, South Australia
Vehicle(s)
lots of Fords
That 370z interior look pretty nice...except some dickhead put the hand brake in the wrong spot....seriously though...the z car is not that wide inside...you can reach the passenger door from the drivers side without stretching out...a mustang is a big car inside....it looks like a reasonable movment to get over to the handbrake. We have a fg mk2 xr6 turbo manual and the handbrake next to the driver is brilliant...we also have ea s manual with the handbrake in the old falcon style under the dash that is a pain in the butt on hilly streets...reaching over a console for a brake is not what I want to do in a 2015 car.
 

Kristian87

Super Moderator
Moderator
Joined
Mar 3, 2015
Threads
87
Messages
3,874
Reaction score
3,210
Location
Newbury, UK
Vehicle(s)
Mustang GT
Are we getting hill-hold feature by any chance? I heard that could be a possibility but not sure. It would minimise a need to use the handbrake.
Yes. Hill start can be toggled on/off on the information display thing. Google the 2015 owners manual - loads of good stuff in there :)
To be fair, with hill start assist, I'm only going to use the handbrake when parking so as annoying as it is that Ford have been lazy here, I can get used to it...
 

croyde

Well-Known Member
Joined
Feb 21, 2015
Threads
70
Messages
1,211
Reaction score
199
Location
SW London.
Vehicle(s)
BMW E36 323
Funny that the Nissan 370 has the handbrake in the wrong place considering that the Japanese home market is RHD.

Just got a reply from the Ford UK FB page.

Tells me to ask my dealer about final specs. Haha, the dealers know sweet FA.
 

WILDB

Well-Known Member
Joined
May 10, 2014
Threads
14
Messages
715
Reaction score
487
Location
Australia
First Name
Will
Vehicle(s)
2017 GT convertible Oxford White
Most cars don't have a handbrake lever these days (e.g. Mondeo) so the hardest part of re-working the centre console goes away. But the Ranger is a good example of one that does, has been properly flipped for RHD/LHD, and gives me a little bit of hope for the production RHD Mustangs.
You are right about the electric park brake in the mk5, however the mk4 Mondeo had it flipped, as does the mk3 Focus.

The thing is it most likely wouldn't even require any engineering changes to the floorpan as the handbrake cable would almost certainly go straight down the middle of the transmission tunnel - even if not it wouldn't be hard for them to make it work with a bracket or similar and relocate the handbrake lever to the RHS. Manufacturing a different handbrake lever and console would be the most difficult exercise.

Hopefully Ford Australia is wrong, because it would seem a bit odd for Ford US to flip the centre stack controls but not the centre console.

If they don't it won't be an issue for automatic drivers, but for those of us who have ordered a manual it will be a PITA trying to change gear with anything in the cup holders.
 

Sponsored

OzS550

Well-Known Member
Joined
Apr 1, 2014
Threads
34
Messages
587
Reaction score
509
Location
Adelaide, Australia
First Name
Michael
Vehicle(s)
GT Fastback
… and which side is the bonnet release on?
 

Race Red GT

Well-Known Member
Joined
Apr 1, 2015
Threads
2
Messages
170
Reaction score
118
Location
Glenbrook NSW Australia
First Name
Phil
Vehicle(s)
2016 GT Racered
Obviously this handbrake issue has disappointed a lot of people but right from the start when RHD prototypes appeared in the states Ford said handbrake would not be flipped.I would guess that the cable/linkage etc is not down centre and would cost time and money to flip.They did say maybe on future models.Also tailshaft sits high in tunnel with exhaust underneath. When the time comes to actually sit in it and drive it,and realize how good it is we might forgive them.
 

Twin Turbo

Super Moderator
Moderator
Joined
Aug 2, 2012
Threads
479
Messages
9,832
Reaction score
7,423
Location
England
First Name
Paul
Vehicle(s)
Mustang '05 GT
I wonder if Mustang will receive an electronic handbrake in a year or two. If this is the case, Ford may have decided it wasn't worth the investment to tool up for a RHD console for "limited" numbers.

It's certainly disappointing, but the lack of front DRL gills and white tail lamps are still my biggest complaint.
 

Race Red GT

Well-Known Member
Joined
Apr 1, 2015
Threads
2
Messages
170
Reaction score
118
Location
Glenbrook NSW Australia
First Name
Phil
Vehicle(s)
2016 GT Racered
We still get gills with headlights on,and I like that appearance so that is something.The white tail lights really contrast against the black back panel so it highlights the tribar lights.I think they will still look good in daylight with lights on.The red tribar LED's will look great at night,even with only two brake lights(per side). When the yellow indicator overrides outside tribar that also should look good. I am greatfull Ford is bringing this car to OZ at a reasonable price.I really want this car.
 

WILDB

Well-Known Member
Joined
May 10, 2014
Threads
14
Messages
715
Reaction score
487
Location
Australia
First Name
Will
Vehicle(s)
2017 GT convertible Oxford White
Looks like the handbrake cable assembly mounts on the left hand side of the tunnel rather than the middle.

Although it could still work having the lever on the right with a mechanism going across to the left, it makes me think Ford are probably less likely to bother.
Screenshot_2015-05-07-05-47-57_1.webp
 

Sponsored

Utedog7

Well-Known Member
Joined
Mar 27, 2014
Threads
11
Messages
257
Reaction score
45
Location
NSW Australia
Vehicle(s)
Toyota Hilux
It is disappointing that they are not going to"complete" the car by flipping the console. It's not a deal breaker for me, though, I've waited too long now. Actually I am more upset about the tail lights than anything, it's part of the integral design for them to be red. It just looks soon much nicer, and I've always hated when P Platers replace the standard red lights with the clear ones. yuk.
 

Monty

Well-Known Member
Joined
Feb 1, 2015
Threads
44
Messages
1,002
Reaction score
295
Location
UK
Vehicle(s)
2015 EB
I've had a number of Ford Cars and generally a fan. However, whilst I love the 2015 Mustang itself, I'd finding myself wishing it wasn't made by Ford! Like others on this forum, I'll be getting one of the first 'batch' of RHDs. Hope there aren't too many issues (QC, design flaws etc.) with their first attempt at a RHD Mustang.

The handbrake on the wrong side of such a large tunnel looks absolutely ridiculous.

Maybe someone will make some sort of aftermarket 'cup-holder' delete for the US market?
 

Aus-MustangGT

Aus-350
Joined
Mar 20, 2015
Threads
32
Messages
2,167
Reaction score
1,822
Location
Australia
Vehicle(s)
'15 WRX/Evo 8 ADM
It is disappointing that they are not going to"complete" the car by flipping the console. It's not a deal breaker for me, though, I've waited too long now. Actually I am more upset about the tail lights than anything, it's part of the integral design for them to be red. It just looks soon much nicer, and I've always hated when P Platers replace the standard red lights with the clear ones. yuk.
There is potential that we could tint the tail lights red which as long as it doesn't effect the brightness should be road legal. I don't mind the clear lens look with the DIB.
 

nadojay

Well-Known Member
Joined
Jul 14, 2014
Threads
8
Messages
223
Reaction score
36
Location
Cairns
Vehicle(s)
2014 SRT Grand Cherokee
Are you guys seriously not changing the handbrake, cupholders and start button from LHD to RHD on the Mustang. What a friggin joke. Its suppose to be a global car not a half arsed attempt
Ford Australia
Thanks for your interest in the Mustang, David, Jim and Will. We're unable to confirm this information at this stage. However, if you click on the following link and register your details, you'll be kept up to date with all exciting information released - https://www.ford.com.au/m-kmi Thanks again, FordService ^JW
 

XRFutura

Well-Known Member
Joined
Mar 24, 2014
Threads
1
Messages
159
Reaction score
159
Location
Winmalee, NSW, Australia
First Name
Ben
Vehicle(s)
2016 Ford Mustang GT
Are you guys seriously not changing the handbrake, cupholders and start button from LHD to RHD on the Mustang. What a friggin joke. Its suppose to be a global car not a half arsed attempt
Ford Australia
Thanks for your interest in the Mustang, David, Jim and Will. We're unable to confirm this information at this stage. However, if you click on the following link and register your details, you'll be kept up to date with all exciting information released - https://www.ford.com.au/m-kmi Thanks again, FordService ^JW
There was a pic posted with a RHD test mule with the starter button on the right side.
Sponsored

 
 








Top