'16 GT, sleeved Predator and F1A94

[turnswrench]

Switch over to the n2mb. A lot less complication. So excited to see this monster running passes again.

Sponsored

 

[80FoxCoupe]

Back to the Edelbrock intake i was working on. To recap, i cut the top off and ported the runners all the way thru, matched ports at head and profiled the runner inlets. My pal Rob fabbed up the sheet alum upper and added two 1/4npt bungs. Added some plenum volume behind cyl8 runner, as the original design had the rear wall up against the runner. Didnt like that so we bumped the wall back 1in.

 

[windsor]

Cool stuff!

 

[80FoxCoupe]

Manifold completed!!!! Turned out killer. Big thanks to @killerkoatings for the powder.

 

[windsor]

Looks awesome.

 

[sloride]

Making progress with my build. Snap shot of my B oil pump gears. Not terrible. Interested in your oil pressurizing set up. Saw a garden sprayer I believe in one of the build photos. Guessing through the oil pressure sender. Any tips or tricks? May use a small 12v gear pump.

 

[windsor]

 

[sloride]

Awesome thanks. I guess a little passive vs active with a powered pump

 

[80FoxCoupe]

Ok, got a track rental coming up on Nov 20th. Decided to install the new intake manifold! Hopefully the car picks up.

 

[80FoxCoupe]

Need to modify the MAF tube a touch, but mocked up nevertheless.

 

[turnswrench]

YASSSS!!!!!

 

[SolarFlare]

that looks right at home on there.

 

[80FoxCoupe]

Made a hit today with the aluminum manifold. Didnt really pick up much and points to the intercooler being insufficient. Either going to do a bigger vertical flow intercooler and larger piping or a small shot of nitrous. Not really sure.

 

[turnswrench]

Made a hit today with the aluminum manifold. Didnt really pick up much and points to the intercooler being insufficient. Either going to do a bigger vertical flow intercooler and larger piping or a small shot of nitrous. Not really sure.

Can I vote for both?

 

[80FoxCoupe]

Can I vote for both?

YES!!!!!!

Sponsored