What did you do to your S550 Mustang today?!

[JTM88]

In an effort to finally find an exhaust setup I like with my catless long tubes, I installed a Lethal Performance resonated double H-pipe and fitted it up to my Thermal R&D muffler section (which I still need to adjust some). So far I’ve got a really nice deep tone with basically no drone. The volume may still be a little higher than I want, but it’s very easy to control with the throttle. I’ll see how it sounds once everything breaks in.

Sponsored

 

[Craig Brown]

Finished the JLT CAI install late today so Friday I can do the relearn phase. I already have a tune installed but I want to have the ECU pick up on the new air flow parameters. I hope this will stop all the misfire codes I was getting with the old CAI. I had to make one plug for an inlet that won't be used anymore. The plug looks cleaner than a cap on the fitting. The JLT came with one plug and I needed two, so I used a brass rod and copied the supplied plug. A lathe is a handy machine to have. I have a 2018 intake manifold on this 2015 and it has fewer vacuum lines. Hence the plug.

 

[The Spider House]

Pardon my ignorance, but did Ford not offer right hand drive in previous models?

Only from 2015 onwards I believe as part of the S550 range.

 

[Tom M]

Only from 2015 onwards I believe as part of the S550 range.

That's very interesting. Thanks for the reply.

 

[GT_MTL]

That's very interesting. Thanks for the reply.

This is when, in Europe, Ford decided to officially sell Mustangs at any Ford dealership like a regular car.
Before that, you needed to import them from North America.

 

[GTP]

I made a DIY Camber gauge for Steeda plates

 

[The Spider House]

Today was "Mustang Day" at a local ford dealership in Preston (UK). Approx 50 Mustangs on show.
Some pics

 

[Sioux444]

Wife and I went to Wisconsin for quilt fabric, and cheese.

 

[Tom M]

Installed Ford Euro tail lamps. I think they look good on the red car.

 

[Todd93]

Fixed my 3rd brake light leak! Installed a new light from American Muscle. Used some strip caulk around all openings, hose tested, NO LEAKS!

 

[rxryanm]

Look at that filthy gal (uprights look great, Warren).

 

[vinny89gt]

Cleaned her up and rolled to the local cars and coffee.

This patina resto-mod was also there. Felt like a sin.

 

[MAGS1]

Cleaned her up and rolled to the local cars and coffee.

This patina resto-mod was also there. Felt like a sin.

Looks like a cool build but yeah, get that LS outta there

 

[LCK22GT]

I’ve been wanting to run it without the engine cover for awhile. Today I had time to clean 4 years of dust off the top end so it looks half decent. I’ve had the strut brace off a couple times now, so I have some new OEM nuts coming tomorrow.

 

[Snakebyte]

Cleaned her up and rolled to the local cars and coffee.

This patina resto-mod was also there. Felt like a sin.

Not just the engine is wrong, but it is apparent much of the patina was intentionally induced.

Sponsored