Timing gear and OPG

[Dat Boi Kumar]

http://www.mustangandfords.com/how-...es-heel-with-a-billet-oil-pump-gears-install/

Sponsored

 

[evo8904]

Ok, I gave in and ordered the MMR opg and timing gear. I want to be able to beat on my car without worrying about these items. I found myself watching the oil pressure gauge more than the tach.

 

[gsxr1300]

might as well do the MMR balancer too lol

 

[Inigo]

Ok, I gave in and ordered the MMR opg and timing gear. I want to be able to beat on my car without worrying about these items. I found myself watching the oil pressure gauge more than the tach.

 

[evo8904]

Lol, I'm going to beat on my car severally after the install

 

[gsxr1300]

Terry, were you running the MRR gear?

Just curious because mine were just installed days ago (OPG and Timing Sprocket). I will not see more than 770 rwhp and may only see 1 or two track days in its life and I'm assuming this is perfectly safe for my setup?

Thanks,
Jaime

Jaime I think he meant the stock timing gear.

 

[beefcake]

first mod we do before putting a s/c on our shop cars 11-14 has always been billet oil pump gears

now with more sprockets failing at higher power levels, we just do them both at the same time

 

[gsxr1300]

But never had a billet gear look like its failing right?

 

[D.Armstrong]

Timing Gear step #18

http://www.mustangandfords.com/how-...es-heel-with-a-billet-oil-pump-gears-install/

After removing timing chain from the left in picture,before removing the right side,step #18 states to rotate crankshaft clockwise 90 degrees.
my question is,wouldn't that take the engine out of time?
:shrug:

 

[Dat Boi Kumar]

After removing timing chain from the left in picture,before removing the right side,step #18 states to rotate crankshaft clockwise 90 degrees.
my question is,wouldn't that take the engine out of time?
:shrug:

That article is for the 11-14 5.0's, the 15 5.0's have a different procedure.
I just posted in DIY a thread on how to do it.

http://www.mustang6g.com/forums/showthread.php?p=953063#post953063

 

[D.Armstrong]

timing gear install

That article is for the 11-14 5.0's, the 15 5.0's have a different procedure.
I just posted in DIY a thread on how to do it.

http://www.mustang6g.com/forums/showthread.php?p=953063#post953063

Thank you sir!!:cheers:

 

[ALLKHEINZ]

My OPG's and Crank Gear went on same time as the blower, not worth the risk imo....its either a little extra now or a whole truck load later...wise choice is do them before boosting

 

[sigintel]

Kumar! Outstanding job sir. Thanks for posting that.
Way to represent for Texas. Free beer next time you are in Austin.

Sponsored